Обновление Cruiser.

[Gatin®]

30/04/2008 - Yesterday - 8 GB uploaded
----------------------------------
K530 - Cid53: R6BC002, R6BD001, R8AA018, R8BA024, R8BB001, R8BC004, R8BE001
K550 - Cid53: R1JD001, K1KG001, K6BC002
K660 - Cid52: R1EA030, R1EA033, R1EB005, R1ED001
K770 - Cid53: R8AA018, R8AB001, R8AC001, R8BA024, R8BC004, R8BE001
K790 - Cid53: R1CC003, R1CG001, R1EG001, R1GB001, R1JC002, R8BC002, R8BF003
K810 - Cid53: K8BA024, R8BC004, R8BE001, R8BF003
S500 - Cid53: R6AC003, R6BC002, R8BA024, R8BE001
T650 - Cid53: R7AA024, R8AB001, R8BB001, R8BC004, R8BE001
W580 - Cid53: R8BA024, R8BE001, R8BG001
W660 - Cid53: R8BB001
W910 - Cid52: R1CA029, R1CA031, R1CA037, R1CA039, R1DA038, R1DA039, R1EA030, R1EA033
Z750 - Cid52: R1CA029, R1CA031, R1CA039, R1DA038, R1DB004, R1DB005
Z770 - Cid52: R1EA030

[Удаленный]

Cruiser v13.02 installer:-
Cruiser Supplementary v1.07
Cruiser FW Restore v1.10 installer
Turtorial : "SOFTWARE DEAD OR PLEASE WAIT"
All Video Turtorial
Cruiser Suite etc.

Download:-
http://rapidshare.com/files/10394458...2_for_msnv.rar

[Удаленный]

Unlocking DB2012 - CID52 based phone with CS TestPoint Unlocker

Cruiser Suite SE TestPoint Unlocker is an application for unlocking SonyEricsson phones. Currently supports only an Unlock-by-Patch, so the phone must be previously flashed with the desired firmware.
Currently supported platforms:
DB2012 - CID52 only
Currently supported phones:
Sony Ericsson W200
Sony Ericsson W300
Sony Ericsson W810
Installation
Run the installer file and follow the installation wizard’s instructions
Cable
Cruiser Suite SE TestPoint Unlocker requires a new Cruiser UC20 cable. The Cruiser UC20 cable consists of:
a data cable
power supply clips
a testpoint needle
Preparation
Make sure the phone has the desired firmware already, otherwise flash it with your favorite flashing tool.
Prepare the phone for the testpoint unlock.
- remove the phone cover
- make sure the Pin27 is clean and accessible

Note: we recommend to use a binocular microscope for either preparation and testpoint connecting

Unlocking procedure
Make sure Cruiser+ Dongle is plugged in your computer. Card ID must end with “-07”.
Run SeTestPointUnlocker.exe
Choose the phone model.
Connect the data cable and power supply clips to the phone.
Double-click on the appropriate cruiser UC20 serial cable.
Wait until the program asks you to connect the testpoint.


Connect the testpoint needle to Pin27.
When informed, the testpoint may be released, the program continues with unlock procedure.
Disconnect the cabling from the phone when program finishes.