Мастер коды для CDMA 800

[Климыч]

если кто знает пишите

[vovan_]

А что имено надо?

[Удаленный]

Модель Cервисный режим
Audiovox 107 45680*47*869#1
Audiovox 120 #86904**89397#
Audiovox 130,100,8300,8600 ##20022002"END"1
AUDIVOX 7900 MENU#ПИСЬМО*1 10СЕК
Audiovox 4000,9500 289F#1
CyberBell 100 ##1475369908##"save"
Ericsson 923885"Menu"
EVRC #763*FF
GTRAN GCP-2000 01#737
Hunday-110 #86904**89397#
Hunday-600 ##20022002"END"1 код 100499
LG-300 "Menu" 9
LG-330 "Menu" 40
LG CX300V "Menu" 0
LG-800 "Menu" 0
LG 111 "Menu" -> 3 -> 0
for Nokia *3001#12345#

Huawei (CDMA)
MASTER SECURITY CODE
309296, 3092, 9296

[Yashka_Yomon_001]

CDMA Service Codes:
Модель Cервисный режим
Audiovox 107 45680*47*869#1
Audiovox 120 #86904**89397#
Audiovox 130,100,8300,8600 ##20022002"END"1
AUDIVOX 7900 MENU#ПИСЬМО*1 10СЕК
Audiovox 4000,9500 289F#1
CyberBell 100 ##1475369908##"save"
Ericsson 923885"Menu"
EVRC #763*FF
GTRAN GCP-2000 01#737
Hunday-110 #86904**89397#
Hunday-600 ##20022002"END"1 код 100499
LG-300 "Menu" 9
LG-330 "Menu" 40
LG CX300V "Menu" 0
LG-800 "Menu" 0
LG 111 "Menu" -> 3 -> 0
for Nokia *3001#12345#

Huawei (CDMA)
MASTER SECURITY CODE
309296, 3092, 9296

Pantech HX-550C (CDMA)
Full reset (phone code reset) ##03*934#9367*192#397#7412569746 PWR,
after reset - ##27732726 PWR and select "with uim"

включение Net Monitor в куретеле 510 ##27732726 pwr

Programming:

Samsung
All type of phones (old models):
NAM programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
Exit test mode - 02
A-Key: menu + 0, code 25##

Samsung A400 and A460:
1. Enter ## and OTKSL
2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)
3. Enter 10 digit MIN and press OK
4. At 1.Basic Menu press the END key
5. Handset will power cycle

Samsung A500:
1. Enter ## and the 6 digit OTKSL
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete

Samsung N240 and N400 programming:
1. Enter ## and type in the 6 digit OTKSL
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN and press OK
5. The display will show NAM with Home SID on the second line
(Note: SID is no longer used)
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming

Samsung Uproar programming:
1. Press MENU key
2. Enter 9 2 0
3. Enter the OTKSL
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete

Samsung N300 programming:
1. Press ## followed by the OTKSL
2. SVC menu will be displayed
3. Press 1 for Phone #
4. Enter the 10 digit MIN and press OK
5. MIN that was entered will be displayed press OK
6. SVC Menu will display press 3 for NAM
7. Enter the 4 digit Home SID press OK
8. Press END and handset will power cycle

Samsung i300 programming:
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. ENTER OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice

Samsung 3500 8500 6100 N200 programming:
1. Press MENU
2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)
3. Enter OTKSL
4. Press 1 at SVC MENU Screen
5. Enter MIN and press OK
6. Press OK 4 times
7. Enter SID (4654) and press OK
8. Press END key
9. Programming is complete

Qualcomm programming:
QCP-800 programming: menu + 3 + 0.
SPC: "000000" or may be other SPC typed by user.
QCP-820/1920/2035: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000"
or may be other SPC typed by user.

QCP 1960 and 2760
1. Press softkey under the work MENU
2. Press 8 0
3. Enter the OTKSL
4. Press softkey for OK
5. Enter MIN and press softkey for OK
6. No SID is require for this handset
7. Press softkey for EXIT
8. Programming is complete

LG:
LG C-300 programming:
menu + 9 and enter SPC: "000000" or may be other SPC typed by user
A-Key: press STO for some time while you can see special code enter zone.
Type 2539** and enter A-key

LG C-330W programming:
menu + 4 + 0 and enter SPC: "000000"
or may be other SPC typed by user.
A-Key: type 2539** and enter A-key

LG C-800W /500 programming:
menu + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key

LG C-510 programming:
menu + 3 + 0 and enter SPC: "000000"
or may be other SPC typed by user.
A-Key: type 2539** and enter A-key

LG 1010 LG 4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. Scroll to MIN and press OK
5. Enter 10 digit MIN scroll to SAVE and press OK
6. Scroll to SID and press OK
(Skip on 4NE1 go to RESET PHONE and press OK to complete)
7. Enter SID (4654) and scroll to SAVE and press OK
8. Programming is complete

LG 5350 programming:
1. Enter ## and enter the OTKSL and press the left soft key under the word "Save"
2. At the Service Program display select Mobile Phone #
and press the OK in the center of the 4 way navigation key
3. Enter the 10 digit MIN and press OK
4. Scroll down to 4. Advanced and press OK
5. Scroll to NMSI and press OK
6. Enter the MSID and press OK
7. Scroll down to 9. Amps Phone # and press OK
8. Enter the MSID and press OK
9. Press the END key

TP 2100 programming:
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press Roller Ball in for OK (ESN will display)
4. Select NEXT (by pressing in the roller ball)
5. Scroll to EDIT and press in the roller ball
6. Enter MIN
7. Scroll to SAVE and press roller ball in
8. Select NEXT at the next 3 screens and then EXIT
9. Programming is complete

TP3000 programming:
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press OK
4. Open flip
5. Use Stylus to enter the 10 digit MIN
6. Press OK (No SID entry is requ red)
7. Programming is complete

TP 5250 programming:
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. The phone display will read SVC Program
5. Scroll to MOBILE PHONE # and press OK
6. Phone display will read Mobile Phone Number
7. Enter the 10 digit MIN and press OK
8. Scroll to Home SID and press OK
9. Enter the 4 digit SID (4654) and press OK
10. Reset Phone will be highlighted. Press OK
11. Phone will reset
12. Programming is complete

LG V111(DM110) programming:
[menu]30.
After ask lockcode, enter: 843691.

Ericsson programming:
Shot NAM 987 + menu
Long NAM 923885 + menu and enter SPC: "000000"
or may be other SPC typed by user.
CDMA mode 904093 + menu
Analog mode 904095 + menu DM mode 904959 + menu

Hyundai:
HGC-120E / -130E programming:
#86904**89397#

HGC-600E programming:
##20022002, END and enter SPC: "000000"
or may be other SPC typed by user.

Sony:
CM-M1300/3300/Z200 programming:
type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000"
or may be other SPC typed by user.

Sony CM-M1300:
1. Power phone on
2. Enter six "1s" ( 111111 )
3. Press the jog dial in
4. Press the jog dial in again to select programming
5. Enter six "0s" for the service security code
6. Phone displays the ESN
7. Press the jog dial in for OK
8. Enter your ten digit cellular telephone number
9. Press the jog dial in for OK
10. Enter your cellular carrier's system ID (SID) without the zeros
(Example: if your carrier's system ID is 00035, enter just 35)
11. Press the jog dial in for OK
12. Enter a name for NAM 1 or just press the jog dial in for OK
13. Phone displays Basic NAM 1 Programming is complete
14. Press the jog dial in
15. Press the jog dial in again for EXIT
16. Phone powers itself off
17. Press the power button to power the phone back on
18. Basic programming is complete

Motorola:
StarTAC 7760/7860 programming:
Service menu: FCN+0+000000+000000+RCL
Test mode: FCN 00**83786633 STO

V60c programming:
Service menu: 74663 # [Menu] [Menu] (programming code)
Test mode: [Menu] 073887 * (security code = 000000)

Motorola Tarpon (120x) programming:
1. Press 74663 (spells PHONE)
1. Press # MENU MENU quickly
2. Enter OTKSL
3. The work MIN will be highlighted
4. Select the word CHANGE by selecting the top right button
5. Select DELETE. Press and hold the button until clear
6. Have the customer enter the 10 digit MIN number
7. Select OK with the top right button.
The "User Activation" screen will appear
8. Scroll to highlight the CDMA Sys ID
9. Select CHANGE by selecting the top right button
10. Enter SID
11. Select OK by selecting the top right button
12. Select DONE with the top left button
13. Press the END key
14. Press # MENU MENU quickly
15. Enter OTKSL
16. The work MIN will be highlighted
17. Select the word CHANGE by selecting the top right button
18. Select DELETE. Press and hold the button until clear
19. Have the customer enter the 10 digit MIN number
20. Select OK with the top right button.
The "User Activation" screen will appear
21. Scroll to highlight the CDMA Sys ID
22. Select CHANGE by selecting the top right button
23. Enter SID
24. Select OK by selecting the top right button
25. Select DONE with the top left button
26. Press the END key

Motorola Phones (ALL):
1. Enter 74663 # FCN FCN
2. Enter OTKSL
3. Enter MIN and press STO
4. Enter SID (4654) and press STO
5. Press STO again - programming is complete
Note: on the Tarpon (120C) you will need to press the MENU key instead of FCN.

Nokia:
5185/6185 programming: *3001#12345#
Software version: *#837# or *#VER# or *#9999#
Serial / ESN: *#92772689# or *#WARRANTY#
Phone reset: *#75681# or *#75682#

Nokia 6185-5170:
1. Press *#639#
2. Enter OTKSL and press OK
3. Enter the MIN and select OK
4. Enter the SID and select OK
5. Programming is complete

Nokia 3585:
1. Enter ## followed by the OTKSL
2. Number (MDN) is highlighted. Press the upper left-hand soft key to select
3. Mobile Number will display. Enter the 10 digit MIN
4. Press OK
5. IMSI will appear. Press and hold the Clear key until the display is empty.
6. Enter 31000 plus the MSID (15 digits total)
7. Press the upper left hand soft key and select OK
8. It will take you back to the SVC Programming.
Press the upper right hand soft key to select EXIT
9. Press END.
10. Phone will power cycle and programming is complete.

SK Teletech:
SK-IM 1000/1400/2000/2200/2400 programming: #7583538324#626#

Getrun 2000:
System NAM programming mode: 0 + 1 + # + 7 + 3 + 7 + SECURITY CODE (000000)
Debug menu: 0 + 1 + # + 3 + 2 + 4 + SECURITY CODE (000000)
Debug screen of field test mode: 0 + 1 + # + 7 + 2 + 7
Test mode: 0 + 1 + # + 7 + 6 + 4 + SECURITY CODE (000000)
System test mode: 0 + 1 + # + 7 + 6 + 8 + SECURITY CODE (000000)

NEOPOINT:
Neopoint 1000:
1. Press M to display Main Menu
2. Scroll to PREFERENCES
3. Press softkey under SELECT
4. Enter 040793
5. Scroll to PROGRAMMING
6. Press softkey under SELECT
7. Enter OTKSL
8. Press softkey under DONE
9. Scroll to PHONE NUMBER
10. Enter 10 digit MIN
11. Scroll to HOME SID
12. Enter SID (4654)
13. Press softkey under SAVE to exit
14. Programming is complete

NEOPOINT 1600
1. Power the phone on
2. Press the "Menu" key
3. Scroll to "Preferences" - press "Select"
4. Key in the "Field Service Code" (the phone will not prompt you for the code)
at the "preferences" screen to access the "Service" menu (Default code is "000000")
5. Scroll to "Programming" - press "Select"
- the phone will ask for the "Subsidy Lock Code"
6. Enter the "Subsidy Lock Code(654321)" to access the "NAM" menu
7. Select the NAM to be programmed (NAM 1 or NAM 2)
8. Program the NAM - Phone number and CDMA Home SID
9. After programming has been completed press "Save" - the phone will reset

Audiovox:
Audiovox 9100:
1. Press ##
2. Enter the OTKSL
3. Display will read Service/Menu 1 Basic…press OK
4. Next screen will read Service Mode/Home SID…press OK
5. Next screen will read Service Mode/Home SID…press OK
6. Device will display Service Menu 1. Basic #
7. Press END button to complete programming

Handspring TREO:
1. Open the flip and press the PHONEBOOK button one time to display the dial pad
2. Enter ## and the OTKSL using the numbers on the Dial Pad
3. Press the handset button shown in the diagram above
4. At the Activations screen enter the MIN
in the phone number field using the numbers on the device keyboard
5. Put a check in the Enabl Number Portability box and type the MSID in the MSIN field
6. Press OK
7. The device will display the network search pop-up and return to the Phonebook display

Hitachi P300:
1. Enter ## and the 6 digit OTKSL
2. Press the Options soft key and then scroll to Save Phone #.
Press the OK soft key.
3. At the NAM display scroll to EDIT and press the OK soft key
4. Display will read NAM and MDN will be highlighted. Press the OK soft key.
5. At the MDN display enter the 10 digit MIN and press the SAVE soft key.
6. At the Save prompt press the OK soft key.
The next display will show several options that should not edited.
7. Press the EXIT soft key and the device will power cycle.
8. Programming is complete.

Kyosera:
Kyocera 2345 1135
1. Press 111111 (#1 key 6 times)
2. Option will be highlighted
3. Press OK
4. Scroll down to Programming
5. The service programming dialog will appear Enter Security Code.
6. Enter the 6 digit OTSKL (code will show as asterisks on screen)
7. Service Options will appear
8. Scroll down to the BASIC NAM1 Info
9. Press OK
10. Select the Phone Number by pressing the OK key
11. Using the keypad enter the 10 digit MIN
12. Press OK
13. Press END to complete the programming

Kyocera 6035:
1. Press 1 six times (111111) and select OPTIONS
2. Select PROGRAMMING
3. Open flip
4. Tap the OTKSL on keypad on the screen. Tap OK
5. Tap on the PHONE NUMBER field. Enter MIN.
6. Leave A-KEY blank
7. Enter HOME SID (4654)
8. Tap SAVE & EXIT
9. Tap YES
10. Phone will be in OFF MODE Close flip.

Kyocera 3035:
1. Press 111111 (the #1 key six times)
2. Options will be highlighted
3. Press in the navigation key
(Navigation key is the button located between the TALK & END key)
4. Scroll to PROGRAMMING using the Navigation key
5. Select PROGRAMMING by pressing in the Navigation key
6. Enter the six digit OTKSL and press in the navigation key
7. SERVICE OPTIONS will appear
8. Scroll down to the Basic NAM1 info
9. Press in the navigation key
10. Clear any numbers that may appear using the "clear" key
(arrow key located directly below the navigation key)
11. Select the PHONE NUMBER by pressing in the navigation key
12. Enter the 10 digit MIN select OK by pressing in the navigation key
13. Press END. Programming is complete.

Kyocera 2255:
1. Press the 1 key six times (111111) "Option will be highlighted
2. Press OK
3. Scroll down to "Programming" and press "OK"
4. Enter OTKSL and press the navigation key
5. "Service Options" will appear scroll down to the "Basic NAM1 Info"
6. Press OK
7. Select Phone Number by pressing OK
8. Enter MIN and press OK again
9. Scroll to Home SID and press OK
10. Enter SID (4654) and press OK
11. Press END. Programming is complete.

QCP 2035:
1. Press 1 six times (111111)
2. Press u key to select OPTIONS
3. Highlight PROGRAMMING and press u key
4. Enter OTKSL
5. ESN will appear press left arrow key to select OK
6. Enter MIN and press з key
7. Press з key again to exit - Programming is complete

Sanyo:
Sanyo 4000 4500 4700 5000 6000:
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. ESN will be displayed - press OK
5. Enter 10 digit MIN and press OK
6. Enter SID (4654) and press OK
7. Press OK twice
8. Programming is complete

Sanyo 5150 5300 and 6400:
1. Enter ## followed by the OTKSL
2. Press MENU SAVE PHONE #
3. Press Ok
4. SVC Programming ill be displayed.
Scroll and highlight Mobile Number. Press OK
5. Press OK again
6. ESN will be displayed. Press OK
7. Mobile Number will be displayed enter the 10 digit MIN press OK
8. Press OK 4 times
9. Phone will power cycle
10. Programming is complete

Sanyo 6000:
1. Press ##
2. Enter OTKSL
3. Press MENU Key and scroll to SAVE PHONE # and press OK
4. ESN will be displayed press OK
5. Enter MIN and press OK
6. Enter SID and press OK
7. Press OK twice more
8. Programming is complete

Sanyo 4900:
1. Enter ## followed by the 6 digit OTKSL
2. Press the MENU/OK key and scroll and highlight SAVE PHONE #
3. Press MENU/OK
4. Scroll and highlight MOBILE NUMBER press OK
5. At the ESN display press OK
6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times
7. At the service program menu scroll to exit and press the MENU/OK key.
8. Programming is complete

Sanyo 6200:
1. Enter ##
2. Enter OTKSL
3. Press the MENU key and scroll to highlight SAVE PHONE #
4. Press OK
5. Scroll and highlight MOBILE NUMBER
6. Press OK twice
7. Scroll and highlight EXIT
8. Press OK
9. Phone will power cycle
10. Programming is complete

Toshiba 2032P:
1. Slide the Radio Standby Switch on the left side of the device to the upper side (ON)
to activate the phone function.
This is the switch with the phone icon over it

2. After power up is completed use the stylus to tap on the ADMIN pull up menu at the
bottom of the screen and select ACTIVATION WIZARD.
If your device has not yet been activated the ACTIVATION WIZARD will
automatically start when you turn on the radio in your device.

3. Tap NEXT 3 times.
If the device has been previously activated it will require only 2 presses.
4. On the fourth screen enter the 6 digit OTKSL using keyboard
5. Enter the MIN in both entery fields then tap NEXT
6. Wait for the device to initialize and display "ready to connect"
7. To initiate IOTA tap the word ADMIN at the bottom of the display
and then Data Provisioning
8. Programming is complete

Synertek:
Code for NAM Programming Mode : Synertek S-200
NAM Set : [MENU] [0] [SPC CODE]
Test Vibro/Rx/Tx/ [#] [#] [5] [5] [5] [5] [SAVE]
Debug Screen: [#] [#] [3] [3] [SAVE]
Debug Screen: [#] [#] [5] [2] [3] [SAVE]
Unknou Code !!!: [#] [#] [3] [2] [5] [SAVE]
Rf Test: [#] [# ][#] [#] [SAVE]

Curitel:
Code for NAM Programming Mode : Hyundai hx510b/h100/h150(Curitel)
NAM Set: [#] [#] [2] [0] [0] [2] [2] [0] [0] [2] [PWR] [1] [SPC CODE]
Field Teste :[#] [#] [2] [0] [0] [2] [2] [0] [0] [2] [PWR] [1] [MASTER CODE]
Enter A-KEY: [2] [5] [3] [9][*][*]
Debug Menu: [#] [#] [2] [7] [7] [3] [2] [7] [2] [6][PWR]
SAR Test: [#] [#] [2] [7] [7] [5] [2] [3] [4] [5] [PWR]
Baud rate: [#] [#] [3] [6][*][*] [PWR]
DM mode Enable:[*][*] [1] [0] [0] [4] [PWR]
DS mode Enable:[*][*] [1] [0] [0] [5] [PWR]
Test Bell/Led/Voice/Dot:[#] [#] [1] [1] [2] [2] [PWR]
RF mode: [#] [#] [2] [2] [4] [0] [PWR]
RAS RAM: [#] [#] [2] [7] [7] [4] [PWR]
CMUX 1:[*][*] [0] [4] [8] [1] [PWR]
CMUX 2:[*][*] [0] [4] [8] [2] [PWR]
RX mode FAX:[*][*] [0] [4] [9] [2] [PWR]
RX mode DATA:[*][*] [0] [4] [9] [1] [PWR]
RX mode RESET:[*][*] [0] [4] [9] [0] [PWR]

*******

Here is a list of various codes to try out. Some may require an
MSL to be able to make full use of the functionality.

##2769737 [##BROWSER] MiniBrowser Settings (2G)
##8626337 [##VOCODER] Set Vocoder
##3282 f0 [##DATA] Setup Menu for Vision handsets
##8463 [##TIME] Airtime Menu
##040793 Debug Menu
##786 [##RUN] Technical Information
be careful with this one, you can reset the handset)
##932 [##WEB] IP Address information (2G)
##889 [##TTY] TTY On or TTY Off
##4357 [##HELP] Help

[roman66]

вот тоже не плохая коллекчия подборка кодов удачи.....

[kmdream]

КСТАТИ #7583538324#8378# - это не что иное как #SKTELETECH#TEST# - так легче запомнить ;)

[sembios]

Motorola ms700 246791538*# + 3 раза нажать кнопку камеры
и остальные моторолки ms400,500,600 5759789*# + 3 раза нажать кнопку камеры

[elektro-nik]

прога с кодами на разные модели , правда с небольшёй хитринкой , выход из проги на последней странице и сразу "лезет" на сайт автора , но это не смертельно !

[urgench]

можете дать ресет код на lg cyon

[myktybek]

kak pereprommirovat Curitel P1 i dr Pantech

[zond_ex]

У меня есть Nokia 6120i, нашол код с помощью которого можно входить в сервисное меню телефона *3001#12345#
Не могу войти в подменю под названием A-key code при попытке войти просит код. Перебрал и переискал уже массу кодов но не один так и не подошол. Объясните кто знает что это за меню и как узнать код на вход?

zond_ex добавил 07.02.2009 в 23:36
Заранее благодарен!

[Wel11w]

Полезная инфа, спасибо, только у меня в Мотороле тоже просит пароль, а что за пароль неизвестно(((

[koikovo]

HTC 6950 Diamond - ##778#, A-KEY шьется кабелем в QXDM

koikovo добавил 12.03.2009 в 23:48
SAMSUNGи - MENU 7 *, MENU 4 *,MENU - Settings *, SPC- 0415

[alexmed]

привет. никто не знает случайно кодов на современные телефоны samsung anycall

alexmed добавил 19.03.2009 в 19:21
проблемма в том что телефон стандарт 3g wcdma+ hdspa не знаю можно ли на мтс подрубить gsm не поддерживает

[koikovo]

модель конкретно назови, может тогда кто-то сможет помочь

[Delemos]

Каким кодом можно сбросить SPC код на стандартный в LG с процем Qualcomm?

[densmen]

Нужен код для lg vx 8300

[roman66]

вот ещо коды для СДМА

Audiovox

Audiovox 4000, 9000, 9100, 9155, 9500 Code for NAM Programming Mode:
Nam Set: [2][8][9][fcn][#][1]
Debug menu : [fcn][0][0][fsc]
Test Mode: Hold [2][*][Rcl][Power]

Audiovox 107 Nam Programming:
Nam Set: [4][5][6][8][0][*][4][7][*][8][6][9][#][1]

Audiovox 9950 Nam Programming:
Nam Set: [#][#][3][2][8][2]

LG Electronics

LG LGC 300 Code for NAM Programming Mode:
Nam Set: [ MENU ][9][ SPC CODE ]
A-Key: PUSH [ STO ] 3 SEC. [2][5][3][9][*][*]

LG LGC 330W Code for NAM Programming Mode:
Nam Set: [ MENU ][4][0][ SPC CODE ]
A-Key: [2][5][3][9][*][*]

LG LGC 800W, 500 Code for NAM Programming Mode:
Nam Set: [ MENU ][9][0][ SPC CODE ]
Debug Mode : [ MENU ][7][0][ FSC CODE ]
Debug Mode : [ MENU ][8][0][ FSC CODE ]
A-Key: [2][5][3][9][*][*]

LG LGC 510 Code for NAM Programming Mode:
Nam Set: [ MENU ][3][0][ SPC CODE ]
A-Key: [2][5][3][9][*][*]


Motorola

Motorola 7760, 7860, 2260, 8160 Code for NAM Programming Mode:
Nam Set: [ FCN ][0] [0][0][0][0][0][0][0][0][0][0][0][0][ RCL ]
Test Mode : [ FCN ][0][0][*][*][8][3][7][8][6][6][3][3][ STO ]

Motorola V60c, V120 Code for NAM Programming Mode:
Nam Set: [7][4][6][6][3][#][Menu][Menu][ SPC CODE ]
Test Mode : [Menu][0][7][3][8][8][7][*][ SPC CODE ]

Motorola v710, v730, v740 Code for NAM Programming Mode:
Nam Set: [8][3][7][8][*][#] press 3 times NATE [0][7][1][0][8][2]
Test Mode: [Menu][0][7][3][8][8][7][*][0][7][1][0][8][2]
Service Menu: [#][7][5][8][3][5][3][2][6][6][#][6][4][6][#]

Motorola v720 Code for NAM Programming Mode:
Nam Set: [0][7][3][8][8][7][*]
Test mode: [8][3][7][8][*][#] [Pres Tape Butone 3 Time]

Motorola V6060 Code for NAM Programming Mode:
Nam Set: [1][4][7][*][3][6][9][#][4][5][6][*][0][#]

Motorola MC150 Code for NAM Programming Mode:
Nam Set: [0][1][7][0][8][2]
Test mode: [8][3][7][8][*][#][Pres Slide Buton 3 Time]

Motorola MC200, MC230, MC250, MC280, MC300, MC500 NAM Programming:
Nam Set: [5][7][5][9][7][8][9][*][#][Cam Buton 3 Time][9[1][5][0][3][7]

[roman66]

правда ето называется рекламировать себя, но ето не реклама тут я выложил программы и коды для CDMA
http://www.azerigsmaz.co.cc
прощу силно не ругать....!

[tusha]

Samsung X, E, V, S-series (korean), e250, v420, s250, etc Nam Programming :

Nam Set: 6548#0**4#6

Nam Set: 47*869#08#9

Nam Set: 74153697193

Test Mode: 5809540*45680 (88 - efs clear)

tusha добавил 27.07.2009 в 21:15
Samsung N356 (India version) Nam Programming :

Test Mode: Menu, 5, down arrow, *

Test Mode: **00## (in some flashes)