Nokia E52 не вкл после прошивки.

[ExpleyT]

Привет всем! Принесли тело Nokia E52, при включении какая то ошибка была. Я прошил через усб Mx-Key и UFS. Вот лог прошивки:

Mx-Key:

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C0851E7E
Using device: USB ROM  and HTI, FW ver: 00.50, SN: 0000791C
Connection status: EHCI:HUB::USB 2.00 (High-speed)
Driver: NMWCD, ver: 7.1.32.73 
Module ver: 1.0.0.20251(25-02-2012), Library ver: 1.0.0.13946(25-02-2012)
Processing MCU file: rm469_071.004_prd.core.fpsx 
 [BB5,XSR 1.6]  size: 104.63 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
CMT SYSTEM ASIC ID: 000000030000022600010007600C192102011104 [RAPUYAMA ver: 1.1]
CMT EM0 ID: 00001040
CMT EM1 ID: 00001030
CMT PUBLIC ID: 20600118E76C03449842C1802679F40426CD90B7
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID: 3E273BF637BE26FA
Loading CMT secondary boot code
 SecondaryBoot: RAPUv11_2nd.fg [BB5]  version: 11.14.0 revision: 3.0 size: 0x3B40
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000  - 0000 0000  type: RAM, asic:CMT 
Storage1: FFFF 0000  - 0000 0000  type: MMC, asic:CMT 
Storage2: 0020 0040  - 0000 0031 [ST  NAND KAT00F00RA] type: FLASH,NOR, asic:CMT 
Storage3: 0000 0001  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage4: 0020 0040  - 0000 0031 [ST  NAND KAT00F00RA] type: FLASH,MuxOneNAND, asic:CMT 
Suggested algorithm: XSR 1.6
Loading CMT update server data
 Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6]  version: 11.14.0 revision: 3.0 size: 0xC66D5
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Update server code loaded.
Waiting for USB device removal ...OK
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 7BE7FA0
FUR: Adding Asic CMT as client OK.
Reading CMT NPC (0x190 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
Reading CMT R&D (0x0 bytes).
Reading CMT PARTNERC (0x0 bytes).
Rpl(Certificate) backup already exist (C:\mobileEx\3.5\data\backup\BB5_35932703746440_CERT.rpl).
CMT PAPUBKEYS HASH: 85F252E351E225CAFC4DFBC8041EABD2823E3500
Storing certificate [NPC, CCC, HWC, R&D] ...OK
Partitioning....
Partitioning complete
Erase size: 173.06 MB
CMT FLASH,MuxOneNAND area [00020000-0003FFFF]
CMT FLASH,MuxOneNAND area [00060000-004DFFFF]
CMT FLASH,MuxOneNAND area [008E0000-0B13FFFF]
Formating partition ...
Flash programming ...
CMT ADA block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT SOS+PMML block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 85F252E3 [RAP Certificate 147 v.1] sent
CMT GENIO_INIT block sent
CMT SOS*UPDAPP block sent
CMT SOS*DSP0 block sent
CMT LDSP block sent
CMT SOS*ISASW block sent
CMT SOS+CORE block sent
CMT SOS+ROFS1 block sent
Programming completed in 29.859 s
Processing PPM file: rm469_071.004_05.01_Russian_prd.rofs2.fpsx 
 [BB5,XSR 1.6]  size: 41.55 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 41.75 MB
CMT FLASH,MuxOneNAND area [07340000-09CFFFFF]
Flash programming ...
CMT SOS+ROFS2 block sent
Programming completed in 11.094 s
Processing PPM file: rm469_071.004_C00.01_DEFAULT_prd.rofs3.fpsx 
 [BB5,XSR 1.6]  size: 8.43 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 20.25 MB
CMT FLASH,MuxOneNAND area [09D00000-0B13FFFF]
Flash programming ...
CMT SOS+ROFS3 block sent
Programming completed in 2.265 s
Processing CNT file: RM469_APE_ONLY_ENO_09wk23v0.091.fpsx 
 [BB5,XSR 1.6]  size: 2.54 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 4 MB
CMT FLASH,MuxOneNAND area [004E0000-008DFFFF]
Flash programming ...
CMT SOS*ENO block sent
Programming completed in 1.234 s
Processing CNT file: rm469_071.004_U009.000_prd.uda.fpsx 
 [BB5,XSR 1.6]  size: 9.52 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 65.25 MB
CMT FLASH,MuxOneNAND area [0B140000-0F27FFFF]
Flash programming ...
Programming completed in 2.671 s
Total time for flashing process(boot+erase+write) was 1 min 1.812 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ... 
Waiting for device boot up ...
Phone not found, retrying ...
Warning: Phone did not reboot to normal mode.
 
 
FULL FACTORY... Failed! (0003)
Completed in 12.187 s

UFS:

Insert USB Cable to Switched OFF Phone and Power ON
USB BOOT  : 60,07 [Rm-469] [2.2.0.3]
CMT ASICID: 000000030000022600010007600C192102011104
EM 1 ID   : 00001040
EM 2 ID   : 00001030
CMT PUBID : 20600118E76C03449842C1802679F40426CD90B7
CMT MODE  : 00
CMT HASH  : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROMID : 3E273BF637BE26FA
CMT 2ND Bt: RAPUv11_2nd.fg, Ver: 11.34.0
CMT 2ND Bt: SILO OK
CMT RMID0 : 00000000-00000000
CMT MCID0 : FFFF0000-00000000
CMT FLID0 : 00200040-00000031, St OneNAND-2G
CMT FLID1 : 00200040-00000031, St OneNAND-2G
CMT RQALG : XSR 1.6
CMT 2ND Boot OK
CMT ALGO  : RAPUv11_XSR17_alg.fg, Ver: 11.34.0
Insert USB Cable to Switched OFF Phone and Power ON
CMT KSIG0 : 85F252E351E225CAFC4DFBC8041EABD2823E3500
CMT ALG Boot OK
IMAGE : rm469_071.004_prd.core.fpsx
CMT NAND Erase Area: 0x00020000-0003FFFF
CMT NAND Erase Area: 0x00060000-004DFFFF
CMT NAND Erase Area: 0x008E0000-0B13FFFF
CMT NAND Partition Format
CMT FLASH ERASE OK, Time: 00:01
Written: 14 Certificate(s)
CMT FLASH WRITE OK, Time: 00:19
IMAGE : RM469_APE_ONLY_ENO_09wk23v0.091.fpsx
CMT NAND Erase Area: 0x004E0000-008DFFFF
ENO FLASH ERASE OK, Time: 00:00
Written: 1 Certificate(s)
ENO FLASH WRITE OK, Time: 00:00
IMAGE : rm469_071.004_U009.000_prd.uda.fpsx
CMT NAND Erase Area: 0x0B140000-0F27FFFF
CNT FLASH ERASE OK, Time: 00:00
CNT FLASH WRITE OK, Time: 00:01
IMAGE : rm469_071.004_05.01_Russian_prd.rofs2.fpsx
CMT NAND Erase Area: 0x07340000-09CFFFFF
PPM FLASH ERASE OK, Time: 00:00
Written: 1 Certificate(s)
PPM FLASH WRITE OK, Time: 00:07
Flashing Completed, Rebooting Mobile
Set UI Defaults ...

После этого тело не включается, бзыкает. Не могу распиновать F-Bus. Может неправильно распиновал? Вот выложил картинку:) Помогите пожалуйста, заранее благодарен!

[destyni]

попробуй по USB версию выше прошить 081.003
F-Bus распин не совсем верный

[mag31]

Скачайте программу " Losnn Clamp Setup V2.1.0". Да поможет она вам! http://depositfiles.com/files/w0kdd3fnt
Бэкапы делали перед прошивкой?
По логам видно, что локала нет - сбросы не проходят, "сим лок" не отдаст аппарат.... Пробуйте 81-ю пока прошить.

[ExpleyT]

Дайте пожалуйста ссылку на 081.003, не могу найти, или плохо искал:)

[mag31]

Дайте пожалуйста ссылку на 081.003, не могу найти, или плохо искал:)

////

http://www.gsmforum.ru/threads/53292-E52-1-(RM-469)

[ExpleyT]

Спасибо скачал 081.003, прошил:) Но включается, заставка нокиа и сразу выключается:(

[fanyasv]

в local входит?

[BUKHARSKY]

По всей видимости нет локала,ТС даже не пишет об этом,дело пахнет rpl-ом.

[Lexsdi]

Rpl(Certificate) backup already exist (C:\mobileEx\3.5\data\backup\BB5_35932703746440_CE RT.rpl)
обратно пробовали записать?

[BUKHARSKY]

Rpl(Certificate) backup already exist (C:\mobileEx\3.5\data\backup\BB5_35932703746440_CE RT.rpl)
обратно пробовали записать?

Зачем?..........

[ExpleyT]

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C0851E7E
Using device: USB ROM  and HTI, FW ver: 00.50, SN: 0000791C
Connection status: EHCI:HUB::USB 2.00 (High-speed)
Driver: NMWCD, ver: 7.1.32.75 
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)
Processing MCU file: rm469_081.003_prd.core.fpsx 
 [BB5,XSR 1.6]  size: 104.64 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
CMT SYSTEM ASIC ID: 000000030000022600010007600C192102011104 [RAPUYAMA ver: 1.1]
CMT EM0 ID: 00001040
CMT EM1 ID: 00001030
CMT PUBLIC ID: 20600118E76C03449842C1802679F40426CD90B7
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID: 3E273BF637BE26FA
Loading CMT secondary boot code
 SecondaryBoot: RAPUv11_2nd.fg [BB5]  version: 11.14.0 revision: 3.0 size: 0x3B40
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000  - 0000 0000  type: RAM, asic:CMT 
Storage1: FFFF 0000  - 0000 0000  type: MMC, asic:CMT 
Storage2: 0020 0040  - 0000 0031 [ST  NAND KAT00F00RA] type: FLASH,NOR, asic:CMT 
Storage3: 0000 0001  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage4: 0020 0040  - 0000 0031 [ST  NAND KAT00F00RA] type: FLASH,MuxOneNAND, asic:CMT 
Suggested algorithm: XSR 1.6
Loading CMT update server data
 Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6]  version: 11.14.0 revision: 3.0 size: 0xC66D5
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Update server code loaded.
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 7BE7FA0
FUR: Adding Asic CMT as client OK.
Reading CMT NPC (0x190 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
Reading CMT R&D (0x0 bytes).
Reading CMT PARTNERC (0x0 bytes).
Rpl(CERT) backup already exist (D:\3.5\data\backup\BB5_35932703746440_CERT.rpl).
CMT PAPUBKEYS HASH: 85F252E351E225CAFC4DFBC8041EABD2823E3500
Storing certificate [NPC, CCC, HWC, R&D] ...OK
Partitioning....
Partitioning complete
Erase size: 173.06 MB
CMT FLASH,MuxOneNAND area [00020000-0003FFFF]
CMT FLASH,MuxOneNAND area [00060000-004DFFFF]
CMT FLASH,MuxOneNAND area [008E0000-0B13FFFF]
Formating partition ...
Flash programming ...
CMT ADA block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT SOS+PMML block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 85F252E3 [RAP Certificate 147 v.1] sent
CMT GENIO_INIT block sent
CMT SOS*UPDAPP block sent
CMT SOS*DSP0 block sent
CMT LDSP block sent
CMT SOS*ISASW block sent
CMT SOS+CORE block sent
CMT SOS+ROFS1 block sent
Programming completed in 35.344 s
Processing PPM file: rm469_081.003_05.01_Russian_prd.rofs2.fpsx 
 [BB5,XSR 1.6]  size: 41.66 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 41.75 MB
CMT FLASH,MuxOneNAND area [07340000-09CFFFFF]
Flash programming ...
CMT SOS+ROFS2 block sent
Programming completed in 13.656 s
Processing PPM file: rm469_081.003_C00.01_DEFAULT_prd.rofs3.fpsx 
 [BB5,XSR 1.6]  size: 8.43 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 20.25 MB
CMT FLASH,MuxOneNAND area [09D00000-0B13FFFF]
Flash programming ...
CMT SOS+ROFS3 block sent
Programming completed in 2.421 s
Processing CNT file: RM469_APE_ONLY_ENO_09wk23v0.091.fpsx 
 [BB5,XSR 1.6]  size: 2.54 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 4 MB
CMT FLASH,MuxOneNAND area [004E0000-008DFFFF]
Flash programming ...
CMT SOS*ENO block sent
Programming completed in 0.859 s
Processing CNT file: rm469_081.003_U009.000_prd.uda.fpsx 
 [BB5,XSR 1.6]  size: 12.36 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 65.25 MB
CMT FLASH,MuxOneNAND area [0B140000-0F27FFFF]
Flash programming ...
Programming completed in 3.969 s
Total time for flashing process(boot+erase+write) was 1 min 14.812 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ... 
Waiting for device boot up ...
Device connected: nmwcdc\Nokia E52 USB Phonet, PORT_ID: 6A60E21
Verifying communication to device OK.
 
 
 
Phone type: RM-469 (Nokia E52-1)
SW version: V ICPR82_11w16.3.5 19-08-11 RM-469 (c) Nokia 
ApeCoreSw: 081.003
Imei plain: 35932703746440-5
Product code: 0590952
Battery voltage: 3729 mV, current: 227 mA
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
 
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
 
 
Imei net: 359327037464405
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 1.875 s
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 1.859 s
Nokia USB ROM disconnected.

телефон сейчас в локал входит, но такая же проблема, нокиа заставка и выключается, в чем может быть проблема?

[BUKHARSKY]

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C0851E7E
Using device: USB ROM  and HTI, FW ver: 00.50, SN: 0000791C
Connection status: EHCI:HUB::USB 2.00 (High-speed)
Driver: NMWCD, ver: 7.1.32.75 
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)
Processing MCU file: rm469_081.003_prd.core.fpsx 
 [BB5,XSR 1.6]  size: 104.64 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
CMT SYSTEM ASIC ID: 000000030000022600010007600C192102011104 [RAPUYAMA ver: 1.1]
CMT EM0 ID: 00001040
CMT EM1 ID: 00001030
CMT PUBLIC ID: 20600118E76C03449842C1802679F40426CD90B7
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID: 3E273BF637BE26FA
Loading CMT secondary boot code
 SecondaryBoot: RAPUv11_2nd.fg [BB5]  version: 11.14.0 revision: 3.0 size: 0x3B40
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000  - 0000 0000  type: RAM, asic:CMT 
Storage1: FFFF 0000  - 0000 0000  type: MMC, asic:CMT 
Storage2: 0020 0040  - 0000 0031 [ST  NAND KAT00F00RA] type: FLASH,NOR, asic:CMT 
Storage3: 0000 0001  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage4: 0020 0040  - 0000 0031 [ST  NAND KAT00F00RA] type: FLASH,MuxOneNAND, asic:CMT 
Suggested algorithm: XSR 1.6
Loading CMT update server data
 Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6]  version: 11.14.0 revision: 3.0 size: 0xC66D5
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Update server code loaded.
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 7BE7FA0
FUR: Adding Asic CMT as client OK.
Reading CMT NPC (0x190 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
Reading CMT R&D (0x0 bytes).
Reading CMT PARTNERC (0x0 bytes).
Rpl(CERT) backup already exist (D:\3.5\data\backup\BB5_35932703746440_CERT.rpl).
CMT PAPUBKEYS HASH: 85F252E351E225CAFC4DFBC8041EABD2823E3500
Storing certificate [NPC, CCC, HWC, R&D] ...OK
Partitioning....
Partitioning complete
Erase size: 173.06 MB
CMT FLASH,MuxOneNAND area [00020000-0003FFFF]
CMT FLASH,MuxOneNAND area [00060000-004DFFFF]
CMT FLASH,MuxOneNAND area [008E0000-0B13FFFF]
Formating partition ...
Flash programming ...
CMT ADA block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT SOS+PMML block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 85F252E3 [RAP Certificate 147 v.1] sent
CMT GENIO_INIT block sent
CMT SOS*UPDAPP block sent
CMT SOS*DSP0 block sent
CMT LDSP block sent
CMT SOS*ISASW block sent
CMT SOS+CORE block sent
CMT SOS+ROFS1 block sent
Programming completed in 35.344 s
Processing PPM file: rm469_081.003_05.01_Russian_prd.rofs2.fpsx 
 [BB5,XSR 1.6]  size: 41.66 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 41.75 MB
CMT FLASH,MuxOneNAND area [07340000-09CFFFFF]
Flash programming ...
CMT SOS+ROFS2 block sent
Programming completed in 13.656 s
Processing PPM file: rm469_081.003_C00.01_DEFAULT_prd.rofs3.fpsx 
 [BB5,XSR 1.6]  size: 8.43 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 20.25 MB
CMT FLASH,MuxOneNAND area [09D00000-0B13FFFF]
Flash programming ...
CMT SOS+ROFS3 block sent
Programming completed in 2.421 s
Processing CNT file: RM469_APE_ONLY_ENO_09wk23v0.091.fpsx 
 [BB5,XSR 1.6]  size: 2.54 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 4 MB
CMT FLASH,MuxOneNAND area [004E0000-008DFFFF]
Flash programming ...
CMT SOS*ENO block sent
Programming completed in 0.859 s
Processing CNT file: rm469_081.003_U009.000_prd.uda.fpsx 
 [BB5,XSR 1.6]  size: 12.36 MB
 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 65.25 MB
CMT FLASH,MuxOneNAND area [0B140000-0F27FFFF]
Flash programming ...
Programming completed in 3.969 s
Total time for flashing process(boot+erase+write) was 1 min 14.812 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ... 
Waiting for device boot up ...
Device connected: nmwcdc\Nokia E52 USB Phonet, PORT_ID: 6A60E21
Verifying communication to device OK.
 
 
 
Phone type: RM-469 (Nokia E52-1)
SW version: V ICPR82_11w16.3.5 19-08-11 RM-469 (c) Nokia 
ApeCoreSw: 081.003
Imei plain: 35932703746440-5
Product code: 0590952
Battery voltage: 3729 mV, current: 227 mA
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
 
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
 
 
Imei net: 359327037464405
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 1.875 s
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 1.859 s
Nokia USB ROM disconnected.

телефон сейчас в локал входит, но такая же проблема, нокиа заставка и выключается, в чем может быть проблема?

SECURITY_TEST failed!

[yurii-62]

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
 
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!

телефон сейчас в локал входит, но такая же проблема, нокиа заставка и выключается, в чем может быть проблема?

Repair SD (Super Dongle Data)
SX4 авторизация и запись проверенного PM 1 и 309 полей.

[BUKHARSKY]

Repair SD (Super Dongle Data)
SX4 авторизация и запись проверенного PM 1 и 309 полей.

Должно помочь.

[Бегимот]

ну почему же, SECURITY_TEST failed на Е52 прекрасно лечится. При условии что железо в порядке.

[yurii-62]

При условии что железо в порядке.

Для этого не плохо посмотреть лог тестов, ((коих ТС не приложил..

[destyni]

терпеливые видать клиенты 2 недели тело с прошивки ждут...

[Miffka]

терпеливые видать клиенты 2 недели тело с прошивки ждут...

ТА не обязательно же клиентский. Возможно ТА самого масера или его родственика или знакомого вот ему некуда торопиься.
Думаю ТА оживёт после процедуры описаной в 13 посте этой темы

[ExpleyT]

спасибо всем ребята, все залил SX4 и PM 1 и 309, все работает.