Nokia n8 не включается после прошивки

[demonam]

У клиента после прошивки перестала работать камера. клиент прошивал фениксом. Прошил ATF прошивкой 79.92 при включении только вибро. инфо

VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Forcing Test Mode via BUSCHECK...

AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

************************************************** ****
TIME STARTS HERE
************************************************** ****

BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000003
ID DWORD 1 : 00000226
ID DWORD 2 : 00010007
ID DWORD 3 : 600C1921
ID DWORD 4 : 02031104
2 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000C35
3 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000C30
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 22A00108
ID DWORD 1 : 3BD60344
ID DWORD 2 : 606E8D84
ID DWORD 3 : 8105C2A6
ID DWORD 4 : 188CB198
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 91 6F 75 21 7F 32 08 12 48 B1 5C 38 DF C8 E8 1B
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : E693EF0D
CRC 1 : AC22615B
Checksum 71

SearchForBootstrap_DCT5..
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPUv11_2nd.fg
Boot File - Version 011.034.00
Boot File - Revision 0x0003 (3)
eBB5ProtocolType == New
PrepareBootstrapFile_DCT5 replaced "SILO" with "2ND\0"
PrepareBootstrapFile_DCT5 replaced "BOOT_MEDIAX" with "BOOT_MEDIA0"
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Secondary Loader Sent...
TransmissionTypeRequest_DCT5_NewProtocol
TRANSMISSION_TYPE_REQUEST_BB5 GET_PROTOCOLS_BB5
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 3E 00 C0
TransmissionTypeRequest_DCT5_NewProtocol
FPIF_TRANSMISSION_MODE_LIST_BB5 using default mode 04 DDRand2TX
TRANSMISSION_TYPE_REQUEST_BB5 : 59 02 41 02 04 00 36 03 00 00 61 1C
Transmission Type Request Sent...
ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID : 06
SubBlocks : 06
1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : RAM 05
Device Index : 00
Manufacturer Code : 0000 -> Flash
Device ID : 0000 -> not detected
Extended/Fixed ID : 0000
Revision ID : 0000
2 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MMC 04
Device Index : 00
Manufacturer Code : FFFF -> Flash
Device ID : 0000 -> BAD FLASH TYPE
Extended/Fixed ID : 0000
Revision ID : 0000
3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Manufacturer Code : 0000 -> Flash
Device ID : 0000 -> not detected
Extended/Fixed ID : 0000
Revision ID : 0000
4 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 01
Manufacturer Code : 0000 -> SPANSION
Device ID : 0001 -> not used
Extended/Fixed ID : 0000
Revision ID : 0000
5 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MuxOneNAND 03
Device Index : 00
Manufacturer Code : 00EC ->
Device ID : 0050 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 0031
6 Sub Block ID : 35 NAND_DRIVER_VERSION_BB5
Block Length : 09
BB ASIC Index : CMT 00
Data : XSR 1.6
Checksum : 09
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
FLS1SendAlgoCodeEx..
SendAlgoCode_DCT5..
SearchForAlgorithm_DCT5..
Looking for ALL Devices...
Searching Algorithm Files MuxOneNAND (03) ManID :00EC DevID :0050 ExtID :0000 RevID :0031
Flash Descriptor
Manufacturer Code : 00EC
Device ID : 0050
Extended/Fixed ID : 0000
Revision ID : 0000
Size : 20000000 (512 MB)
VPP Info : 0000
Erase10s : 1E
Block1s : 32
BErase1s : 02
Reserved0 : 00
Reserved1 : 00
Reserved2 : 00
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPUv11_XSR17_alg.fg
Algorithm File - Version 011.034.00
Algorithm File - Revision 0x0003 (3)
eBB5ProtocolType == New
Algo Loader Sent...
SendCodeStart_NewProtocol :
SendCodeStart_NewProtocol_DCT5 : No Error - 0 (0x00)
TransmissionTypeRequest_DCT5_NewProtocol
TRANSMISSION_TYPE_REQUEST_BB5 GET_PROTOCOLS_BB5
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 3E 00 C0
TransmissionTypeRequest_DCT5_NewProtocol
FPIF_TRANSMISSION_MODE_LIST_BB5 using default mode 04 DDRand2TX
TRANSMISSION_TYPE_REQUEST_BB5 : 59 02 41 02 04 00 36 03 00 00 61 1C
SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
FUR control Ok...
VPP Enabled by Software
Using Internal VPP
VPP Enabled by Software
FLASH_VOLTAGE_INIT_BB5 : 5C 01 26 04 00 00 00 00 D4
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
PAPUB_KEYS_HASH_RESP_BB5 2A
BB Asic Index : 00
CMT PAPUBKEYS HASH:
D172C32473AE199B213465ABB3853246F9631231


Scanning Simlock Applet Type...
OK

=================================================
PA_SL3 Applet detected
=================================================

* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...

FlashInfo.RestartMode : 2

Waiting for Phone to Go Online...
Elapsed Time: 1s
Elapsed Time: 2s
Elapsed Time: 3s
Elapsed Time: 4s
Elapsed Time: 5s
Elapsed Time: 6s
Elapsed Time: 7s
Elapsed Time: 8s
Elapsed Time: 9s
Elapsed Time: 10s

прошивка

TIME STARTS HERE
************************************************** ****

CMT Hardware : 600C192102031104
CMT PUBLIC ID : 22A001083BD60344606E8D848105C2A6188CB198
CMT ROOTHASH : 916F75217F32081248B15C38DFC8E81B
CMT ROM_ID : E693EF0DAC22615B

Secondary Loader Sent...
Algo Loader Sent...
VPP Enabled by Software
Using Internal VPP
CMT PAPUBKEYS HASH:
D172C32473AE199B213465ABB3853246F9631231

STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
PARTITION_INFO_REQUEST_BB5 : No Error - 0 (0x00)
Erase_SendEraseBlock_BB5_NAND
Task in Progress... Please Wait...
Erase_SendFormatPartition_BB5_NAND
Task in Progress... Please Wait...
Successfully erased..
Time Taken to Erase : 00:00:01
Flashing Speed: 5.00 Mhz (AUTO)
Processing : RM-596_014.002_79.92_prd.core.fpsx
Total blocks to write : 549
>> CMT Rootkey Hash CERT : ADA
>> CMT Rootkey Hash CERT : KEYS
>> CMT Rootkey Hash CERT : PRIMAPP
>> CMT Rootkey Hash CERT : RAP3NAND
>> CMT Rootkey Hash CERT : SOS+PMML
>> CMT Rootkey Hash CERT : PASUBTOC
>> CMT Rootkey Hash CERT : PAPUBKEYS
>> CMT Rootkey Hash CERT : GENIO_INIT
>> CMT Rootkey Hash CERT : SOS*UPDAPP
>> CMT Rootkey Hash CERT : SOS*DSP0
>> CMT Rootkey Hash CERT : LDSP
>> CMT Rootkey Hash CERT : SOS*ISASW
>> CMT Rootkey Hash CERT : SOS+CORE
>> CMT Rootkey Hash CERT : SOS+ROFS1
ContinueFlash_DCT5 Complete
Continue Flash Complete : : No Error - 0 (0x00)
Time Taken to Flash : 00:01:28

Processing Image File :
C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-596\RM-596_014.002_297.02_HU_CV_79.92_prd.rofs3.fpsx
Erase_SendEraseBlock_BB5_NAND
Task in Progress... Please Wait...
Successfully erased..
Time Taken to Erase : 00:00:00
Flashing Speed: 5.00 Mhz (AUTO)
Processing : RM-596_014.002_297.02_HU_CV_79.92_prd.rofs3.fpsx
Total blocks to write : 2
>> CMT Rootkey Hash CERT : SOS+ROFS3
ContinueFlash_DCT5 Complete
Continue Flash Complete : : No Error - 0 (0x00)
Time Taken to Flash : 00:00:00

Processing Image File :
C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-596\RM-596_014.002_04.01_Russian_79.92_prd.rofs2.fpsx
Erase_SendEraseBlock_BB5_NAND
Task in Progress... Please Wait...
Successfully erased..
Time Taken to Erase : 00:00:00
Flashing Speed: 5.00 Mhz (AUTO)
Processing : RM-596_014.002_04.01_Russian_79.92_prd.rofs2.fpsx
Total blocks to write : 178
>> CMT Rootkey Hash CERT : SOS+ROFS2
ContinueFlash_DCT5 Complete
Continue Flash Complete : : No Error - 0 (0x00)
Time Taken to Flash : 00:00:28

Processing Image File :
C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-596\RM-596_014.002_297_HU_CV.02_79.92_prd.uda.fpsx
Erase_SendEraseBlock_BB5_NAND
Task in Progress... Please Wait...
Successfully erased..
Time Taken to Erase : 00:00:00
Flashing Speed: 5.00 Mhz (AUTO)
Processing : RM-596_014.002_297_HU_CV.02_79.92_prd.uda.fpsx
Total blocks to write : 329
ContinueFlash_DCT5 Complete
Continue Flash Complete : : No Error - 0 (0x00)
Time Taken to Flash : 00:00:57

Total Flash Write Time (Flashing Only) : 00:02:55
Total Flashing Time (Booting + Erase + Flashing) : 00:02:57

Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 15 STATUS_NAND_OK_BB5
Block Length : 0F
BB ASIC Index : 00
Device Type : 03
Device Type : 00
Num Bad Blocks : 00000002
Additional Bad : 00000002
Correctable ECC : 00000000
FlashInfo.RestartMode : 2
Forcing Test Mode via BUSCHECK...
BOOTING BB5 Phone...

************************************************** ****
TIME STARTS HERE
************************************************** ****

CMT Hardware : 600C192102031104
CMT PUBLIC ID : 22A001083BD60344606E8D848105C2A6188CB198
CMT ROOTHASH : 916F75217F32081248B15C38DFC8E81B
CMT ROM_ID : E693EF0DAC22615B

Secondary Loader Sent...
Algo Loader Sent...
VPP Enabled by Software
Using Internal VPP
CMT PAPUBKEYS HASH:
D172C32473AE199B213465ABB3853246F9631231


Scanning Simlock Applet Type...
OK

=================================================
PA_SL3 Applet detected
=================================================

* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...

FlashInfo.RestartMode : 2

Waiting for Phone to Go Online...
Elapsed Time: 1s
Elapsed Time: 2s
Elapsed Time: 3s
Elapsed Time: 4s
Elapsed Time: 5s
Elapsed Time: 6s
Elapsed Time: 7s
Elapsed Time: 8s
Elapsed Time: 9s
Elapsed Time: 10s

================================================
Basic Phone Information
================================================

[Azat49]

прошей его последний прошивкой и будет работать а последния 111.030.0609 ты просто скорей всего ее прошил ниже прошивкой и поэтому он только вибро и дает

[alekseisochi]

* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...

понизили, либо клиент понизил.

[demonam]

Прошилось и включилось. А камера так и не работает. Может ли быть это програмный сбой?

[kurgan93]

Прошилось и включилось. А камера так и не работает. Может ли быть это програмный сбой?

а может вы для начала логи тестов выложите ? что б было над чем думать.

[demonam]

Мистика. После прошивки тест на камеру не проходил, счас все проходит. Соберу ТА проверю

[alekseisochi]

Встречались на этой модели умершие камеры, было проблема в видеопроцессоре (D1400)

[demonam]

В общем цветные полосы с последующим зависании при включении камеры, буду катать видеопроц

[zabavinalex]

В общем цветные полосы с последующим зависании при включении камеры, буду катать видеопроц

А камеру не хотите для начала подкинуть?

[demonam]

камеру сразу подкидывал. перекатал, все работает