пришел с диагнозом - упал,
зависал в меню
попросили перешить
вот процесс прошивки MX-KEY через UFS
Код HTML:
MXKEY Serial: [FT SCR2000 0] - 
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Connection status: UHCI:HUB:HUB:USB 1.10 (Full-speed)
Driver: UFS2XX, ver: 3.6.0.0 , NTMP ver: 2.6.0.0
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
 SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 00EC 2208 [Samsung K8F5615ETM,256 Mbits] page size: 128 K type: NOR area: 01000000-02FFFFFF
FlashID1: 0000 0001 [unused/removed] 
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 
 Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 008C02EF:DA3BDA66
ASIC type: 11
UEM Imei: ***8   (имеи совпадают)
Flash Imei: ***8
RPL saved to "C:\mobileEx\3.5\data\backup\RPL\35417002159028_BACK.rpl" 
Processing MCU file: rm340__06.82.mcusw 
 [DCT4,DCT4 ALGORITHM]  size: 10.71 MB
 Supported Ids: 3160, 3161, 3162, 3164, 3166
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
 SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 00EC 2208 [Samsung K8F5615ETM,256 Mbits] page size: 128 K type: NOR area: 01000000-02FFFFFF - COMBO FLASH
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 
 Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 008C02EF:3B8ADA60
Erase skipped.
Flash programming ...
Error while programming [14] at 0x01070000, Result: 0072
flashing terminated !
Task failed at (08000025)!!!
 Last RX buffer: 00 72
стирание повторяется циклически
если нужен приложу
еще не грел
Ваши соображения?