Nokia C5-00 RM-645 Не прошивается

[ARguitar]

Доброго всем времени суток!
Принесли Nokia c5-00 с просьбой прошить так как со слов клиента телефон "тормозит" на каждом шагу.
В телефоне была версия 071.005 клиент сказал обновил через сервис прямо в телефоне, после чего он стал работать "не значительно медленнее" но вполне исправно месяц до недавнего времени, теперь "чаще стал тормозить"

Начал с того что хотел слить Mx-key Rpl.
Scan показал что всё впорядке и всё на месте...но rpl слить не удалось так как он ругался на UFS...
Встречался с этим уже несколько раз поэтому решил как обычно прошить фениксом:

Лог Феникс

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007600C192102031104
BB Asic Index is: 00
EM Asic ID is: 00000C35
BB Asic Index is: 00
EM Asic ID is: 00000C30
BB Asic Index is: 00
Public ID is: 27400212E73A57403C4A7BA7E2F825FE0375C031
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 916F75217F32081248B15C38DFC8E81B
BB Asic Index is: 00
ROM ID: E693EF0DAC22615B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0020
Device ID: 0040
Extended device ID: 0000
Revision ID: 0031
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 0020
Device ID: 0040
Extended device ID: 0000
Revision ID: 0031
Loading update server code: 812840 bytes
Update server loaded
Asic CMT: Start programming 148142 KB...
Asic CMT: Programming data sent: 0%
Error sending programming command 0x8400A814
ERROR Sending status request to Algo! 0x8400A814
Error while programming CMT!
Error when flashing Algo (0x84012283)

Другая версия феникса просто пишет что не удалось перевести телефон во Flash mode...

После нескольких попыток прошить, попробовал включить от бп, теперь только вибро и всё, дальше потребление немного скачет и ничего не меняется....
Подключил к программаторам
ни Ufs ни Mx-key прошить его не могут , в Local не входит,
При нажатии чек на UFS:

UFS Check

1ST BOOT : C0,07 [Rm-645] [2.2.0.0]
CMT ASICID: 000000030000022600010007600C192102031104
EM 1 ID : 00000C35
EM 2 ID : 00000C30
CMT PUBID : 27400212E73A57403C4A7BA7E2F825FE0375C031
CMT MODE : 00
CMT HASH : 916F75217F32081248B15C38DFC8E81B
CMT ROMID : E693EF0DAC22615B
CMT 1ST Boot OK
Cannot Find KEYS CERT
BAD BOOT
ERR: CMT 2ND Boot File not Found
Rebooting Mobile

UFS по USB

Insert USB Cable to Switched OFF Phone and Power ON
USB BOOT : 60,07 [Rm-645] [2.2.0.0]
CMT ASICID: 000000030000022600010007600C192102031104
EM 1 ID : 00000C35
EM 2 ID : 00000C30
CMT PUBID : 27400212E73A57403C4A7BA7E2F825FE0375C031
CMT MODE : 00
CMT HASH : 916F75217F32081248B15C38DFC8E81B
CMT ROMID : E693EF0DAC22615B
CMT 2ND Bt: RAPUv11_2nd.fg, Ver: 11.16.0
CMT 2ND Bt: SILO OK
CMT RMID0 : 00000000-00000000
CMT MCID0 : FFFF0000-00000000
CMT FLID0 : 00200040-00000031, St OneNAND-2G
CMT FLID1 : 00200040-00000031, St OneNAND-2G
CMT RQALG : XSR 1.6
CMT 2ND Boot OK
CMT ALGO : RAPUv11_XSR17_alg.fg, Ver: 11.16.0
CMT KSIG0 : D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
CMT ALG Boot OK
IMAGE : rm645_071.005_prd.core.fpsx
CMT NAND Erase Area: 0x00020000-0003FFFF
CMT NAND Erase Area: 0x00060000-004DFFFF
CMT NAND Erase Area: 0x008E0000-0AE3FFFF
CMT NAND Partition Format
CMT FLASH ERASE OK, Time: 00:00
ERR: CMT FLASH WRITE PROG_DATA_REQ Fail, Time: 00:20
Process Failed, Repowering Mobile

Mx-Key Bus Check

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Connection status: UHCI:HUB:USB 1.10 (Full-speed)
Driver: UFS2XX, ver: 3.8.14.0 , NTMP ver: 2.8.14.0
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPU ver: 1.1]
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 27400212E73A57403C4A7BA7E2F825FE0375C031
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 9.50.0 revision: 3.0 size: 0x3A40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
NewProtocol is not supported for current interface (UFS_USB V2.8 (c) SarasSoft 2007.).
Please select correct loader version from 'Config' menu !

При попытке прошить пишет No Response from Phone...

Mx-Key по USB

Connection status: EHCI:HUB::USB 2.00 (High-speed)
Driver: nmwcdnsuc, ver: 7.1.32.70
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
Processing MCU file: rm645_071.005_prd.core.fpsx
[BB5,XSR 1.6] size: 96.64 MB
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 241F64A6
CMT SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPU ver: 1.1]
CMT EM0 ID: 00000C35
CMT EM1 ID: 00000C30
CMT PUBLIC ID: 27400212E73A57403C4A7BA7E2F825FE0375C031
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
CMT ROM ID: E693EF0DAC22615B
Loading CMT secondary boot code
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 11.14.0 revision: 3.0 size: 0x3B40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.6
Loading CMT update server data
Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6] version: 11.14.0 revision: 3.0 size: 0xC66D5
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Update server code loaded.
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 241F64A6
FUR: Adding Asic CMT as client OK.
Reading CMT NPC (0x168 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD3 bytes).
NPC_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\BB5_35698904274876_CE RT.rpl"
CMT PAPUBKEYS is blank/erased.
Storing certificate [NPC, CCC, HWC, R&D] ...OK
Partitioning....
Partitioning complete
Erase size: 170.06 MB
CMT FLASH,MuxOneNAND area [00020000-0003FFFF]
CMT FLASH,MuxOneNAND area [00060000-004DFFFF]
CMT FLASH,MuxOneNAND area [008E0000-0AE3FFFF]
Formating partition ...
Flash programming ...
CMT ADA block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT SOS+PMML block sent
WriteDevice failed: Протекает наложенное событие ввода/вывода
Error while programming [00] at 0x000C0400, Result: 0000
Task failed at (0800001C)!!!
Last RX buffer: 80 10 6F 00

Я в тупике, подскажите пожалуйста что делать....