Прошивка с нуля Nokia 2630

[Slava094]

UFS Check

1st Boot: Ok, DCT4, UPP: 3162 [Rm-298] [2.1.0.1]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x02FFFFFF,0020881C,St M58LR256KC
Algorithm: u3_intel.fia, Ver: 4.80.0
Rebooting Mobile

UFS Info

MCU SW : V 07.60 10-04-09 RM-298 (c) Nokia
PPM SW : V 07.60 10-04-09 RM-298 (c) Nokia EJ
Product : Nokia 2630
Prd.Code:
Bpr.Code: 0544206
Prod.Sn : KGU866200
HW Vers : 1002
UEM : 1328
UPP : 12642 [3162]

MX-Key BUS Check

ASIC ID: 0x3162 [UPP_8M ver: 6.11]
u3_2nd.fia: [DCT4] version: 4.70.1 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 881C [ST M58LR256JU,256 Mbits] page size: 128 K type: NOR area: 01000000-02FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000
u3_intel.fia: [DCT4 ALGORITHM] version: 4.70.1 revision: 0.7 size: 0x5548
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00D2D03A:DA3BDA66
ASIC type: 11
UEM Imei: 35377400xxxxxx

Phone not responding !

MX-Key Write RPL

ASIC ID: 0x3162 [UPP_8M ver: 6.11]
u3_2nd.fia: [DCT4] version: 4.70.1 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 881C [ST M58LR256JU,256 Mbits] page size: 128 K type: NOR area: 01000000-02FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000
u3_intel.fia: [DCT4 ALGORITHM] version: 4.70.1 revision: 0.7 size: 0x5548
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00D2D03A:DA3BDA66
ASIC type: 11
UEM Imei: 35377400xxxxxx
ASIC ID: 0x3162 [UPP_8M ver: 6.11]
u3_2nd.fia: [DCT4] version: 4.70.1 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 881C [ST M58LR256JU,256 Mbits] page size: 128 K type: NOR area: 01000000-02FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000
u3_intel.fia: [DCT4 ALGORITHM] version: 4.70.1 revision: 0.7 size: 0x5548
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Programming UEM Imei (OTP) ...
UEM programmed successfully.
Programming FLASH Imei ...failed
Phone not responding !