X3-02 rm-639 как прошить

[vova-trojan]

Всем привет! у меня аналогичная проблема с x2. принесли с соседней мастерской, горе мастер сказал то что только корпус по меня и всё, до этого тип работал. при вкл белый дисплей и откл. прошиваю фениксом, последней версией прошивки, шьется не до конца, потом перегружается и идет зарядка. где капать подскажите? вот логи

лог

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 14656 bytes
Secondary boot loaded
Loading update server code: 636228 bytes
Update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 53089 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
WARNING: Asic CMT: NAND status reported bad blocks
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Starting to recover the phone
Recoverying phone
Waiting for communication response: 1
Initializing
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Scanning image files...
Unable to set the phone to flash mode. Unable to flash.

M	закрывайте логи тэгом spoiler.