Nokia 2700c Контакт Сервис

[serikch]

Принесли тело данное до пожара с диагнозом "не включалка".. насколько помню тело было софтово замучено. После пожара у тела корпус расплавился а внутрь попала вода, перекатал бутер и КП, по потреблениям в железе все теперь в порядке. Осталось сделать Контакт Сервис. Форумчане кто пробовал справляться с данной проблемой посоветуйте с чего начать. Заранее благодарен. В любом случае мне надо его теперь сделать так как клиентка в курсе что у меня был пожар и думает что все эти проблемы из за пожара..
Выкладываю логи:

Лог МХ

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.9019(20-11-2010), 1.0.0.15042(20-11-2010)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 1B700005EECE8D5616D185C239AD1E72024210E9
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
FlashID0: 0089 8982 - 0000 0000 [Intel NU48F512,512 Mbits] type: NOR,CMT
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS HASH: 3EA22A1DDA660002E56108DB5072A10F8709443F
TransmissionMode: DDR&TX2
Original Imei: 35150104748720
Original Product code: 0587992
Bluetooth ID: C8979FFA7438

Phone Type: RM-561 (Nokia 2700 classic)
SW Version: V 09.97 18-06-10 RM-561 (c) Nokia
Imei plain: 35150104748720-4
Product Code: 0579319
Language Pack:
- not available.

This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !

SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST failed!
SECURITY_TEST failed!

SIMLOCK_DATA corrupted!

Лог Циклона (Анализа)

Started Phone Security Analysis...
MCU Version V 09.97
MCU Date 18-06-10
Product RM-561 (Nokia 2700 classic)
Manufacturer (c) Nokia
IMEI 351501047487204
Mastercode 42035131
Reading Security Block...
Security block OK and saved to "RM-561_351501047487204_03.01.2011_144024.SecurityBloc k.PM"
Step 1 : Testing SIMLOCK
-- SIMLOCK PROBLEM --

Phone have failed SIMLOCK Test, that means Simlock Area is DAMAGED!
To repair simlock area, Select Unlock method : "RPL CALCULATION",
And then click DIRECT UNLOCK. SL Area will be re-formatted.

-- SIMLOCK PROBLEM --
Step 2 : Testing SECURITY
-- SECURITY PROBLEM --


Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!
To repair it, simply slick "SX4 Authorization / SD Repair" button.
After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically)

Additionaly, Checking HWC/CCC Certs...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1B700005EECE8D5616D185C239AD1E72024210E9
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3EA22A1DDA660002E56108DB5072A10F8709443F
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
!!!!! HWC IS CORRUPTED, ANOTHER REASON OF SECURITY TEST FAILED !!!!!
!!!!! CCC IS CORRUPTED, ANOTHER REASON OF SECURITY TEST FAILED !!!!!
Restarting MCU...
-- SECURITY PROBLEM --
Step 3 : Analyzing Security Block
"1B700005EECE8D5616D185C239AD1E72024210E9.C0001C66 " Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking ECC KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!
Warning: At least one Certificate Test failed, but no Local Generic RPL File found, Put it in SX4 folder.

Насколько в курсе дел насчет СЛ3, то для анлока тут понадобится мощная видео карта, незнаю быть может сойдут параметры моего компьютера.. На всякий случай выкладываю..

Видеоадапдер nVIDIA GeForce 9500 GT
Объем видео ОЗУ 1гБ

Оперативка 2гБ

Процессор DualCore Intel Core 2 Duo, 2933 MHz (11 x 267)

и довольно интересно.. может кто пробовал.