Чем разблокировать Samsung c3010

[mishled]

сейчас буду пробовать,попробую отпишусь...

[mishled]

прошил,сделал анлок всё тоже самое просит ввести код 00000000 не подходит
Region: 1, 0x20000000-0x20000063, Length: 100 bytes
Region: 2, 0x2000C000-0x200113FF, Length: 21504 bytes
Region: 3, 0x20016000-0x2001C59B, Length: 26012 bytes
Region: 4, 0x2001E000-0x2001E0B3, Length: 180 bytes
Region: 5, 0x2003803C-0x20040ED7, Length: 36508 bytes
Region: 6, 0x20058000-0x20058037, Length: 56 bytes
Region: 7, 0x20058138-0x2005C5AF, Length: 17528 bytes
Region: 8, 0x20078000-0x2018BE0B, Length: 1129996 bytes
Region: 9, 0x20300000-0x219AF86F, Length: 23787632 bytes
1st Boot Ok, McuId: 00050026, Rom: 00050026, 13-1.2 (Vision X113E)
2nd Boot Ok, McuId: 00050026, Rom: 00050026, 7-2.0
Fll Boot Ok, Vers: 5.22, fl_sceptreeg_vx100_eval_v24_s05_2.sre
Flash1: Fl_Id: 00890000_887E0000 - Intel SIBLEY 512
Baud Rate Set: 460800 bps
MCU File: CODE_C3010XXIH2.s3
Flashing NOR part...
Write Done, 25019596 byte(s), Time: 15:18
MSL Data Read Ok, Use [Mobile Info] to Read Codes
S/N : RVUSB63677

Phone Must be with Battery and Powered On !
MSL : Active
S/N : RVUSB63677
MSL : Deactivated

[mishled]

В программе есть функция читать коды при нажатии читать коды пишет...
1st Boot Ok, McuId: 00050026, Rom: 00050026, 13-1.2 (Vision X113E)
2nd Boot Ok, McuId: 00050026, Rom: 00050026, 7-2.0
Fll Boot Ok, Vers: 5.22, fl_sceptreeg_vx100_eval_v24_s05_2.sre
Flash1: Fl_Id: 00890000_887E0000 - Intel SIBLEY 512
Baud Rate Set: 460800 bps

[mishled]

сбросил MMI и всё заработало!