Nokia 3110c Contact Service
Доброго времени суток ув.форумчане. Принесли телефон 3110с с дефектом Contact Service..
По словам клиента тело потухло когда через блютуз мелодии передовали.
Инфо УФСа
Прошивка на УФСе проходит удачно..Код:MCU SW : V 07.21 05-11-08 RM-237 (c) Nokia. PPM SW : V 07.21 05-11-08 RM-237 (c) Nokia. I Product : Nokia 3110c Prd.Code: 0544359 Bpr.Code: 0542523 Prod.Sn : MYK883402 HW Vers : 5008 EM RETU : 32 EM TAHVO: 53 RFIC Ver: 17211721 DSP Vers: ICPR61_08w10 IMEI : 353225-03-024659-5 SL Serv : SIMLOCK SERVER VERSION 63 SL Conf : 244-07-00000000000 SL Prof : 8000000000000006 SL Count: 00 00 BLK1= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN BLK2= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN BLK3= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN BLK4= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN BLK5= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN BLK6= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN BLK7= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN Provider: Nokia Test;Finland
Analyze Security циклона
лог SX АвторизацииКод:Started Phone Security Analysis... MCU Version V 07.21 MCU Date 05-11-08 Product RM-237 Manufacturer (c) Nokia. IMEI 353225030246595 Mastercode 1455235127 Reading Security Block... Security block OK and saved to "RM-237_353225030246595_27.05.2010_211601.SecurityBlock.PM" Step 1 : Testing SIMLOCK SIMLOCK SEFLTEST PASSED OK! Step 2 : Testing SECURITY -- SECURITY PROBLEM -- Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED! To repair it, simply slick "SX4 Authorization / SD Repair" button. After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically) Additionaly, Checking HWC/CCC Certs... Booting CMT... CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101 CMT_EM_ASIC_ID: 00000232 CMT_EM_ASIC_ID: 00000353 CMT_PUBLIC_ID: 1C7001114F8E7E56FF55138A54BAF2CABE294FCC CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1 CMT_BOOT_ROM_CRC: 191EC665 CMT_SECURE_ROM_CRC: DFAAF68F CMT Ready! Searching for BootCode: DualLine 32Bit RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using OLD BB5 FLASHING PROTOCOL FlashChip[0,CMT]: 0x0089898100006A21, Intel, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit Searching for BootCode: DualLine 32Bit FlashChip 0x00898981 (Intel), Size: 32MBytes, VPP: 9V RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.50.0, Algo: BB5 ALGORITHM Flashbus Write baud set to 2.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: C0E691EA16A7593A9BB28832D7312A39F7ED668D APE Subsystem Not Found Flashbus Write baud set to 5.0Mbits HWC Looks OK! CCC Looks OK! Restarting MCU... -- SECURITY PROBLEM -- Step 3 : Analyzing Security Block "1C7001114F8E7E56FF55138A54BAF2CABE294FCC.C0001C66" Exists, That is good... Checking SUPERDONGLE... SUPERDONGLE FOUND AND CHECKSUM OK! PASSED! Checking SIMLOCK... SIMLOCK FOUND AND CHECKSUM OK! PASSED! Checking MCU&DSP TIMESTAMPS... MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED! Checking CMLA KEYS... Failed to decode Security Section, Box Reported: Security Section Checksum Error (decryption fails?) Checking ECC KEYS... Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?) Checking DIV KEYS... Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?) Analyze finished!
HWC Looks OK!Код:SX4 Authorization / SD Repair Procedure Started.... "1C7001114F8E7E56FF55138A54BAF2CABE294FCC.C0001C66" Exists, That is good... MCU Version V 07.21 MCU Date 05-11-08 Product RM-237 Manufacturer (c) Nokia. IMEI 353225030246595 Mastercode 1455235127 Reading Security Block... Security block OK and saved to "RM-237_353225030246595_27.05.2010_211854.SecurityBlock.PM" SX4 Status: Not authorized (76) Started mutual authenthication with card... Receiving Phone Seed 1... Phone Seed 1 Received Sending calculated Data 1, and expecting Seed 2... Calculated Data 1 accepted, Phone Seed 2 Received Sending calculated Data 2 Calculated Data 2 sent, Checking Authorization Status again Authorization successfully finished! Looking for Virgin PM In Database... Found, writing... [1,0] Written, Length: 114 bytes, Status: OK [1,2] Written, Length: 98 bytes, Status: OK [1,4] Written, Length: 110 bytes, Status: OK [1,6] Written, Length: 98 bytes, Status: OK [1,8] Written, Length: 110 bytes, Status: OK [1,13] Written, Length: 98 bytes, Status: OK [1,16] Written, Length: 86 bytes, Status: OK [1,18] Written, Length: 86 bytes, Status: OK [1,20] Written, Length: 86 bytes, Status: OK [1,25] Written, Length: 4 bytes, Status: OK [1,29] Written, Length: 6 bytes, Status: OK [1,34] Written, Length: 80 bytes, Status: OK [309,0] Written, Length: 4 bytes, Status: OK [309,1] Written, Length: 2 bytes, Status: OK [309,2] Written, Length: 12 bytes, Status: OK [309,4] Written, Length: 12 bytes, Status: OK [309,5] Written, Length: 12 bytes, Status: OK [309,7] Written, Length: 12 bytes, Status: OK [309,8] Written, Length: 12 bytes, Status: OK [309,17] Written, Length: 12 bytes, Status: OK [309,22] Written, Length: 12 bytes, Status: OK Write PM Finished, Record written OK: 21, Record written NOT OK: 0
CCC Looks OK!
Restarting MCU...
-- SECURITY PROBLEM --
Step 3 : Analyzing Security Block
Ребят подскажите как лечить это... Заранее благодарен.. Надеюсь возможно вылечить это Циклоном, УФСом и Джау..
