Все полезное для китов

[Удаленный]

мои архив ....сам не тестил;)

[veniamin]

SpiderMan V2.22 NEW Crack

Все версии SpiderMan крякнуты!!!!!!

http://rapidshare.com/files/11569756...2_new.rar.html

ссылка на рапиде заработала!!!

[postgate]

Слитие калибровок и т.д. с тел на процах MTK
Так же мануал но он немного староват, думаю разберётесь

[Удаленный]

CHINA INFINEON CHIP UNLOCK CODE

[Удаленный]

China_new_hot_mtk-flash_tool.v-5.0

[Удаленный]

Flash_tool V3.748.0 NEW

New features:
1. USB Download on MT6225/MT6226/MT6227 Series BB
2. GPS Download
3. [DA] Supports new NOR Flash device
[ST] M58WR064HU
[ST] M58WR064HL
[TOSHIBA] TV00560002EDGB
[TOSHIBA] TV00560003EDGB
[TOSHIBA] TY00670002APGN
[INTEL] PF38F30xxM0x0xx
[INTEL] PF38F30xxM0x1xx
[SHARP] LRS18CK
[AMIC] A82DL3228T
[AMIC] A82DL3228U
[AMIC] A82DL3238T
[AMIC] A82DL3238U
[AMIC] A82DL3248T
[AMIC] A82DL3248U
[SAMSUNG] K5L6331CAA

4. [DA] Supports new NAND Flash device
[HYNIX] HY27UF082G2M



http://rapidshare.com/files/12024166...l_v3.748.0.rar

[Titar]

Вот от меня, этой прогой можно русифицировать тел, по функционалу слабовато, но... бесплатно:ts:
MTK Resource Edit 1.2 (Cracked!)

[Titar]

Вот пособирал со всего компа, вроде ещё такого не выкладывали...

1. China Pinouts by Fas Gsm
2. Видео о том как делают эти телефоны, короткое, но ради общего развития подойдет
3. Сборка Pinouts от Infinity
4. Общая инструкция для китов на русском

China Mobile Pinouts Guide (Flash)
Chinese plant (Video)
Infinity Pinout
User Manual All in 1 (Rus)

Качайте, а я пока пороюсь может ещё чего найду интиресного на винтах

[veniamin]

Spaiderman v 2.41 kracked

HERE


password:laghouat-gsm
надо писать вручную!

[bond95]

а для конвертора видео есть что?

AnyMP4_Media_Converter_6_1_.0

http://www.4shared.com/file/54450285...ified=3e009efd

AVI CONVERTER WITH SETTING

http://www.4shared.com/file/54450548...ified=3e009efd

MP4 Converter (China)


http://www.4shared.com/file/54450769...ified=3e009efd

[JDragon]

Прога сама переименовывает слитый фул в удобный и понятный формат с версией ПО, названием проца и т. д.

Рульная штука для работы с исходным кодом фулла!

[XXXVetall]

http://www.schwantz-i.org/chinese.htm

[Xishnik787]

China Fila Infa v2.5 программа, позволяющая определить версию файла фуллфлеша, количество и название языковых пакетов и тип процессора. Поддерживаются фуллфлеши телефонов на процессорах MTK и SPD.

[Xishnik787]

Программа для вычитывания кодов с китайских подделок на CPU MTK

[Xishnik787]

Сборник конверторов видеофайлов для китайских телефонов.

[postgate]

special version repairs and change imei on only 1 second,works with usb, com, or any box rj45 cable supports : SC6000- 6600R -6600D

[Удаленный]

CHINA PHONES CODES

*#66*# Set Factory Mode CONFIRMED 
*#8375# Show Software Version CONFIRMED 
*#1234# A2DP ACP Mode CONFIRMED 
*#1234# A2DP INT Mode CONFIRMED 
*#0000# + Send : Set Default Language CONFIRMED 
*#0007# + Send : Set Language to Russian CONFIRMED 
*#0033# + Send : Set Language to French CONFIRMED 
*#0034# + Send : Set Language to Spanish CONFIRMED 
*#0039# + Send : Set Language to Italian CONFIRMED 
*#0044# + Send : Set Language to English CONFIRMED 
*#0049# + Send : Set Language to German CONFIRMED 
*#0066# + Send : Set Language to Thai CONFIRMED 
*#0084# + Send : Set Language to Vietnamese CONFIRMED 
*#0966# + Send : Set Language to Arabic CONFIRMED 

More some codes for reset mobile china
*#77218114#
*#881188#
*#94267357# 
*#9426*357# 
*#19912006# 
*#118811# 
*#3646633#

CHINESE MODELS: 

default user code: 1122, 3344, 1234, 5678 

Engineer mode: *#110*01# 

Factory mode: *#987# 

Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200 

Restore factory settings: *#987*99# 

LCD contrast: *#369# 

software version: *#800# 

software version: *#900# 

set default language: *#0000# Send 

set English language: *#0044# Send 

set English language (new firmware): *#001# Send

also
==========
Service codes BenQ: 
software version: *#300# 
test mode: *#302*20040615# 

Service codes Pantech: 
software version: *01763*79837# 
service menu: *01763*476# 
reset defaults (phone/user code reset to default): *01763*737381# 

Service codes 3xx, 5xx: 
software version: *#79# 
software version: *#837# 
Service codes VK200, VK2000, VK2010, VK2020, VK4000: 
software version: *#79# 
service menu: *#9998*8336# (hold #) 
reset defaults (phone/user code reset to default): *#9998*7328# (hold #) 

Service codes LG: 
software version: 2945#*# 

Service codes Sony-Ericsson: 
J100 software version: #82# 

Service codes Fly: 
2040(i) reset defaults: *#987*99# Send 
MX200 reset defaults: *#987*99# Send 
MX200 software version: *#900# Send 
SL300m reset defaults: *#987*99# Send 
SL300m software version: *#900# Send 
SL500m reset defaults: *#987*99# Send 
SL500m software version: *#900# Send 
MP500 reset defaults: *#987*99# Send 
MP500 software version: *#900# Send 
Set language to English: *#0044# 
Set language to Russian: *#0007#

Service codes Konka: 
C926 software version: *320# Send 
C926 set default language: *#0000# Send 
C926 set English language: *#0044# Send 

Service codes GStar: 
GM208 (Chinese Nokea 6230+) engineering menu: *#66*# 
Set language to English: *#0044# 
Set language to Russian: *#0007# 

ZTE Mobile1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatelE205 
unlocking phone code,only press***847# without simcard 

E900 software version: *#5002*8376263# 
E900 full reset: *2767*3855# 
Service codes Spice: 
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200 
S410 engineer mode: *#3646633# 
S900 software version: *#8375# 
S900 serial no: *#33778# 
Service codes Philips: 
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200 

Service codes "Chinese" models: 
default user code: 1122, 3344, 1234, 5678 
Engineer mode: *#110*01# 
Factory mode: *#987# 
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200 
Restore factory settings: *#987*99# 
LCD contrast: *#369# 
software version: *#800# 
software version: *#900# 

Service codes BenQ: 
software version: *#300# 
test mode: *#302*20040615# 

Service codes Pantech: 
software version: *01763*79837# 
service menu: *01763*476# 
reset defaults (phone/user code reset to default): *01763*737381# 
Service codes VK-Mobile 3xx, 5xx: 
software version: *#79# 
software version: *#837# 
service menu: *#85*364# (hold #) 
Service codes VK200, VK2000, VK2010, VK2020, VK4000: 
software version: *#79# 
service menu: *#9998*8336# (hold #) 
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes LG: 
software version: 2945#*# 
KG300 NVRAM format: 2945#*# -> menu 15 

Service codes Sony-Ericsson: 
J100 software version: #82# 

Service codes Fly: 
M100 software version: ####0000# 
2040(i) reset defaults: *#987*99# Send 
MX200 reset defaults: *#987*99# Send 
MX200 software version: *#900# Send 
SL300m reset defaults: *#987*99# Send 
SL300m software version: *#900# Send 
SL500m reset defaults: *#987*99# Send 
SL500m software version: *#900# Send 
MP500 reset defaults: *#987*99# Send 
MP500 software version: *#900# Send 
Set language to English: *#0044# 
Set language to Russian: *#0007# 

Service codes Konka: 
C926 software version: *320# Send 
C926 set default language: *#0000# Send 
C926 set English language: *#0044# Send 

Service codes GStar: 
GM208 (Chinese Nokea 6230+) engineering menu: *#66*# 
Set language to English: *#0044# 
Set language to Russian: *#0007# 

Service codes Motofone-F3: 
Motofone F3 software version: **9999* Send 
***300* Set SIM Pin 
***310* / ***311* SIM Pin ON | OFF 
***000* Reset Factory settings 
***644* Set Voicemail number 
***260* / ***261* Auto keypad lock ON | OFF 
***510* / ***511* Voice Prompts ON | OFF 
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF 
***200608* Send: software version 
***200606* Send: software version 
***200806* Send: flex version 
***250* / ***251* Keypad tones ON | OFF 
***470* Select time format 
***500* /***501* Prepaid Balance Display ON | OFF 
***520* Change language 

Service codes Motorola: 
C113, C114, C115, C115i, C116, C117, C118 software version: #02#* 
C138, C139, C140 software version: #02#* 
C155, C156, C157 software version: #02#* 
C257, C261 software version: #02#* 
V171, V172, V173 software version: #02#* 
V175, V176, V176 software version: #02#* 
C168, W220 software version: *#**837# 
W208, W375 software version: #02#* 
and "yes"''

-mobile Inno30, 55, 89, 90, 99, 100, A10, A20, P10, Vk200
- Set full factory *741*737381# 
- Set full factory *741*7373868#
- Set full factory *741*2878#
- Set Engineer Mode *888*888#
- Check software version *888*837# 
I-mobile 100 ,200 , 313
- Check software version #*888#
I-mobile 309, 310
- Check software version *0*4636# 
- Test Mode *0*6268#
I-mobile 311
- Check software version #*878# 
I-mobile 511
- Check software version *1222*1#
I-mobile 301, 302,308, 508, 601, 602, 603, 604, 606, 611, 901, 902
- Check software version *#159#
- Set Factory Mode *#32787#
- Set Engineer Mode *#3646633#

I-mobile 503, 506, 605, 600, 607, 608
- Set Engineer Mode ***503#
- Set Factory Mode ***504#
- Set Auto Test ***505#
I-mobile 509, 612
- Set Factory Mode *#66*#
I-mobile 504, 505, 803
- Check software version *68*48#
- Set full factory *789#
- Test Mode *#789#
I-mobile 305, 306, 315, 510, 609, 609i,516
- Check software version *#8375#
- Set Factory Mode 878
I-mobile 610
- Check software version *#22#
I-mobile J101, J102
- Test Mode *23638777*783781#
I-mobile 502, 502i, 505, k9, 802 
- Check software version *201206*4636#

[casus]

SpiderMan 2.42 cracked

[postgate]

Изменение ресурсов прошивки, плюс поддержка шрифтов

[WiTiW]

SpiderMan_V2.45

SpiderMan Video Tutorial

Crack SpiderMan - после установки SpiderMan заменить этим файлом