Phoenix_Service_Software_2009_34_10_40495 This Phoenix Service Software installation package includes following SW components: - Phoenix Service Software 2009.34.10.40495 - DK2 Dongle Driver v 7.14.0.25 - Nokia Connectivity Cable USB Driver v 7.1.17.0 (for Win2000 driver version 6.85.15.0) - Flash Update Package 09.044.022 - FLS-x Dongle Driver v 2.09.28 - FPS-11 version 5.10.0 Error corrections & changes: - Corrections & changes to DCT-4 IMEI / ESN rebuild procedure - Please note that depending on what has been replaced, JBV-1 needs power supply from different sources. - This is required, because depending on the case JBV-1 needs to set phone in different operating modes - Supply power to JBV-1 Docking station from FPS-10 or FPS-21 Flash Prommer output or external power supply depending on what components were replaced, see table above. - Connect phone and scan product, read phone information to check communication with phone - Open ôToolsö û ôIMEI / ESN Rebuild DCT-4ö - Menu - Provide Tucson Password and PIN code which have been delivered to you by email. Please note that characters are case sensitive - Select ôUEM Replacedö if needed, see table above. - Please note that SW update must be done separately, it can not be combined with this procedure Known errors & limitations: - Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept. - Flashing with Flashing with FLS-5, SS-46 and product specific adapter is not supported anymore - If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix ôPrommer maintenanceö is looking for the files from the correct location which is ôC:Program FilesCommon FilesNokiaTssFlashö. If not, Phoenix will show error ôUpdate via ini û file failedö. In this case, select ôUpdateö from that Phoenix ôPrommer maintenanceö û UI, browse to correct directory and select ôfpsxupd.iniö for all other prommers except the FPS-8. - Multi Flash has limited capabilities, launch Multiflash UI first and then connect phones one by one, do not attempt to service more than 5 phones at the time

http://rapidshare.com/files/31633070...4_10_40495.exe