Report this postReply with quoteService codes "Chinese" models:
by dash4000 on Sun Dec 14, 2008 1:27 pm
Êîä:*********************************************** THIS IS A WARNING TO ANYONE USING THESE CODES ON THEIR PHONE *********************************************** If you enter into Engineer mode DO NOT SELECT & DO NOT EVEN HIGHLIGHT the "High Speed SIM" option using the stylus or finger, you may easily brick your phone, making it virtually dead, and you will have to flash it to get it to work again! Always use the side volume control button to navigate the menus while in Engineer mode, that way an accidental selection of an undesired option may not occur, and it is much safer! Only use the stylus when you absolutely want to select an option! *********************************************** Many of the settings in this first post have not been tested to work properly on the i9/i9+ cell phones, read other member posts in the rest of the thread that have correctly identified codes which work at least on their version of the i9 phone, as there is less likely to input a code which will make your phone inoperable! If you brick your phone (make it inoperable) by using an input code, read the forum FAQ Upgrade & Flashing section (here), because you may need to flash your phone with a new firmware to get it to work again! If you find these codes do not work on your phone, & you are looking for specific codes that do work on your phone, then ask about them in this thread, & do not open up a new thread on the forum asking about what codes will work. *********************************************** Engineer mode - While in this mode you can change many of the phone's default settings, but be careful, you can also brick your phone. The most common Engineer mode codes for current models are these: *#82043036# *#3646633# Factory mode - In this mode there are also some tests & settings. In this mode you can also find out more detailed information than just version information, like what processor chip (CPU) the phone has in it, usually under the BB chip menu, and some other hardware/software on the phone version numbers. The most common Factory mode codes for current models are these: *#66*# *#66# The most common Version Information mode code for current models is this: *#8375# The most common IMEI number showing mode code for current models is this: *#06# *********************************************** Service codes "Chinese" models: default user code: 1122, 3344, 1234, 5678 Engineer mode: *#110*01# Factory mode: *#987# Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200 Restore factory settings: *#987*99# LCD contrast: *#369# software version: *#800# software version: *#900# set default language: *#0000# Send set English language: *#0044# Send set English language (new firmware): *#001# Send more to it and more: *#77218114# *#19992006# dd *#881188# #*94267357# khoi phac lai he thong -> mã là 1122 *#3646633# *#33778# S500 *#77218114# C600 *#881188# *#19992006# #*94267357# *#881188# *#77812114# *#19992006# *#9426*357# *#0084# call *#0000#, *#0044# Default English *#0086#, *#0886# set to China *#0084#, *#0966# set to Vietnamese *#77218114# *#19992006# *#881188# #*94267357# *#77218114# *#0000#, *#0044# Default English *#0086#, *#0886# set to China *#0084#, *#0966# set to Vietnamese *#77218114# *#0084#call moden s500:reset*#881188# *#19992006# *#881188# #*94267357# *#77218114# *#9426*357# *#9426*357# *#0084# call *#0000#, *#0044# Default English *#0086#, *#0886# set to China *#0084#, *#0966# set to Vietnamese *#77218114# *#19992006# *#881188# #*94267357# I9+++ LN01 *#9928375# - info *#9923646633# - engeener menu I9+++ new MT6225_S00.S9_V_9_0_AR *#090903# - Engeniring menu adress 00c1a3db
