Furious Pinout,s
Hi ..Here U Will Find All Kind Of Furious Box Pinouts.
Rj45 ,Usb etc
-------------------------------------------------
LG 18 PIN CONNECTOR
1..........................18
1 GND connect to 6, 7 RX, 8 TX
O2X4 PINOUT
KEYBOARD
1----------10
1,2 - GND (black)
7 - Data + (green)
8 - Data - (white)
10 - +5V USB (red)
BenQ, O2X3, M300, O2x1b, O2x1li PINOUT
KEYBOARD
1----------10
1 - GND
5 - RX
6 - TX
NEWGEN, 8150, 8210, 8290, 8260, C1200
24.............12.........6.......1
13 RX PHONE
14 TX PHONE
12,19 GND
LOBSTER PINOUT
KEYBOARD
1------------------18
17,18 - GND
12 - RX
11 - TX
T28 Cable
Phone pins:
+++Keyboard+++
|12345678|9|1011|
pins:
----------
1. nc
2. nc
3. nc
4.
5.
6.Rx Phone
7.Tx phone
8.
9. Vcc 5V
10.GND - to RJ45 pin 3
LG 3G PINOUT:
Phone pins:
24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
21 link to 2
19 link to 12 GND green
18 Tx white
17 Rx red
16 Vcc +5v orange
Sharp 802/902/703/903 PINOUT
Use video connector of phone:
1.
2. gnd
3.
4.
5. Phone Tx
6.
7. Phone Rx
8.
9. + 5V to rj45 +5v AND over 1 Kohm resistor to RJ45 Tx Pin
VG207, VK207i, VK500, VK520, VK530, VK560, VK570, VK900
18-pin connector
KEYBOARD
1.........18
1. Ground
7. Rx
8. Tx
microsnapper Pinout:
Keyboard
1------------------18
1 = Gnd
11 = Tx
12 = Rx
MAXON 79XX AND O2X1 PINOUT:
Standard data cable 3v interface
keyboard UP
1............12
1+12 - GND
10 - Tx
11 - Rx
SIEMENS C62 Cable Fix for cable that comes with box
if u have c62 furious cable that only have red (+) wire .. u must open the cable jack.. and see
2 Gnd
5 Tx
7 Rx
9 +9v
simply take a new wire and jumper it into (2) Gnd..
Now it is ur Gnd (- )wire
Now cable is ready to unlock c62 mobiles...connect to the furiuos box.. left click must be push to the box..
Must note that when upper left LED is RED means +5V is enabled. I say that because on soem boxes on position means button unpressed.
Îòâåòèòü ñ öèòèðîâàíèåì
Ïðîáëåìà
