Setool обновление и новости сапорта

[Gatin®]

from now on cost of full unlock will be 7 credits (3 for signature part ,4 for csca part)

uploaded w760 r3ba031 r3ba035 firmwares,filesystems, custpacks
uploaded apac,hongkong,taiwan c902 firmwares,filesystems,updated custpacks

[Gatin®]

 uploaded r1fa035 firmware for K850 (hehe, maybe it will fix BROD issue  )

because that firmware is not released yet, i prepared language package with all available languages inside.
treat that language package as customization file.
if you not need specific language - delete it from language package.

[veniamin]

NEW SETOOL VERISON

v0.914029_to_v0.914035.exe

- updated a2 loaders to recent version
- updated supported flash types for locosto-based phones
- updated phone model names
- minor bugfixes

http://rapidshare.com/files/12171893..._v0.914035.exe


DOWNLOAD HERE

[Gatin®]

that is ok, they are well-known stealers
(all methods for new semc phones in their "kukuruzer suite" are stolen from setool2)

but what is NOT ok - their arrogant and completely bullshit tirade about
"worning, 'our' zovtware can eazily ripair phonez killet by setool2"

what a f_uckers !
their copycat programmer stoled setool2 new altbypass solution absolutely completely,byte-by-byte.
same executor, same loaders (even "loader for setool2" words are left), etc.
and they are dare to say such nonsense thing.
once again "kukuruzer" proved to be cheap lying shit.
just be careful,guys. do not trust mizerable kukuruzer team.
they are always last, they always working bad and slow, they are always lying.

it is better to use original, proved solutions.

[Gatin®]

updated k850 r1fa035 firmwares,fs images,custpacks
updated W760 r3ba035 firmwares,fs images,custpacks

[Gatin®]

 v0.914036

- added support for new locosto-based ODM phones - T270,T280,R300,R306,T303,etc.
  supported flash,correct unlock by patch,usercode reset. 
  be careful - select CORRECT model and CORRECT flashfiles.
- updated phone model names
- minor bugfixes

rapidshare LINK

uploaded r300 r2ba005 firmware
uploaded t280 r2bc002 firmware
uploaded t303 r2ba005 firmware

[Zloi snaiper]

ну вот свершилось, хотя когда то лазер и отвергал что будет использовать тп в сетуле для востановления гдфс

v0.914037

- added testpoint for db2020 phones.
  db2020 testpoint idea made by dre_ambox team. 
  as i respected that, i not included db2020 testpoint in setool2 
  for a long time. but anything ends sometime.
  now, setool2 users can enjoy gdfs db2020 gdfs repair.

  usage: 
  1. it is only and only for professionals. 
     users,advanced users, please "go away".
  2. testpoint is +3.3 voltage, connected to specific pin. 
     we suggesting to use +3.3v battery 
     (battery ground MUST be connected with phone's GROUND)
  3. go to emptyboard fill & repair.
  4. select any db2020 model.
  5. press "TP STAGE #1". read instructions and execute them.
  6. press "TP STAGE #2". read instructions and execute them.
  7. phone is BROWN now. 
  8. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
  9. if flashing went fine, flash db2020 erom with needed CID.
  10. phone now retail and repaired. fullflash phone as usual.
  testpoint pictures (courtesy of drea_mbox team) included.
  after SETOOL2 db2020 testpoint procedure phone FULLY 
  working in "alternative security bypass" mode without ANY restrictions.

- greatly decreased locosto-based SEMC ODM phones security bypass time.
  (instead ~50 seconds, now we have ~18 seconds)
- minor bugfixes.

db2020 testpoint can't be possible without GREAT help from SPH 
and inspirations from vasilius

warning ! our solution can easily fix phones, killed with 
"kukuruzer zuide software" (based on solutions,stoled from setool2)

[NEMO®™]

v0.914037/UNI - Repair via TP - Как оно работает....

1. Заходим на закладку Empty Fill & Repair.
2. Выбираем модель (в данной версии поддерживается только DB2020)
3. Выбираем соединение через УФС.
4. Нажимаем кнопку TP STAGE#1.
когда программа попросит
ATTACH TP #1 AND PRESS "READY"
нужно сделать ТР, тоесть: на ТР нужно подать +3,3В.
Я делал так : взял обычный аккумулятор с нокии и припаялся к нему. К минусу припаял проводок и подсоеденил его к экрану на телефоне (GND). К плюсу припаял проводок с иголкой, им и тыкал по ТР.
RELEASE TP #1 AND PRESS "READY"
это значит что нужно отпустить ТР и нажать кнопку Ready

если ТР ок, то программа напишет
TP #1 LOOKS OKAY
в противном случае программа напишет
TP #1 INCORRECT

5. Если ТР1 прошел успешно нажимаем TP STAGE#2.
делаем ТР2 точно так же как и ТР1 в пункте 4.

Если ТР1 и ТР2 прошли успешно, у Вас Brown тело.

6. Нужно записать в телефон gdfs_in_ssw_format. Это нужно сделать обязательно на закладке Empty Fill & Repair. ЭТО ВАЖНО!

для этого в список файлов добавляем при помощи кнопки Add gdfs_in_ssw_format для вашей модели, например , если телефон к800 то добавляете K800_GDFS_SSW.ssw.
Гдфс файлы находятся в папке \gdfs_in_ssw_format, в каталоге с setool2g.exe.
нажимаем кнопку Flash.

7. Теперь нужно прописать EROM.
Остаемся на закладке Empty Fill & Repair
В список файлов добавляем

DB2020EROM_CNV_RED52_BROWN_CID49_DB2020.ssw

он находится в паке \eroms

Жмем кнопку флеш.

Если в телефоне прошивка была в порядке, телефон должен включится. Но рекомендую прошить тело полностью заново, уже на закладке SonyEricsson обычным путем.

Всё, наши Вам поздравления.

PS.: ТР"ы используются от коробки мечты. Картинки включены в дистрибутив. Скажем им большое спасибо за идею и проделанную работу.

http://rapidshare.com/files/12611580...14037.rar.html

[ildar80r]

v0.914038

- added SCRC testpoint repair for db2012 phones.
supported CIDs : 50,51,52,53.
(db201x testpoint idea made by dre_ambox team).
usage:
1. it is only and only for professionals.
users,advanced users, please "go away".
2. testpoint is +3.3 voltage, connected to specific pin.
we suggesting to use +3.3v battery
(battery ground MUST be connected with phone's GROUND)
3. go to emptyboard fill & repair.
4. select needed db2012 model.
5. press "TP STAGE #1". read instructions and execute them.
6. phone is BROWN now.
7. now flash CORRECT db201x erom with needed CID.
NOTE, THAT EROM CID SHOULD BE >= OTP CID,OTHERWISE YOU WILL GET DEAD PHONE.
10. phone now retail,repaired and unlocked. fullflash phone as usual.
testpoint pictures (courtesy of drea_mbox team) included.
as all db201x shares same mcu, w200 testpoint picture is good
for all db201x phones.
IF YOU WROTE EROM WITH INCORRECT CID - USE "TP STAGE #2"

PLEASE NOTE, THAT CURRENT IMPLEMENTATION REQUIRES
VALID GDFS STRUCTURE. SO, IT SITUABLE ONLY FOR 5-LOCKS
REPAIR AND FULL STANDALONE UNLOCK.

- added all possible db201x eroms, now users can make cid50/51/52/53
phones from emptyboard phones
(not forget: add to firmware area gdfs_in_ssw FIRST and EROM LATEST)
- minor bugfixes.

RAPIDSHARE http://rapidshare.com/files/13640878...14038.rar.html

db201x testpoint can't be possible without GREAT help from SP

warning ! our solution can easily fix phones, killed with 
"kukuruzer zuide software" (based on solutions,stoled from setool2)

[genayivanovo]

- PDA gdfs write was broken, because of that almost all crucial operations
with PDA phones not worked. fixed. thx to infogsm for report.

RAPIDSHARE LINK

r306,r306a r1ab002 firmware uploaded
c902 r3c038 firmware,fsimages,custpacks updated

[Gatin®]

uploaded K330 r1cd001 firmware
uploaded t280 r1cb002 (mr1) firmware

[veniamin]

Новые версии SETool

----------------------------

v0.914040

- updated a2 loaders to recent versions
- added db3210 support
- updated bypass packages
- minor bugfixes

rapidshare LINK


http://rapidshare.com/files/14604620..._v0.914040.exe

[ravt]

v0.914041

- fixed old security PDA standalone support
- updated bypass packages
- minor bugfixes

[Gatin®]

uploaded k330 r1ce002, w902 r3da026+all_langpack, 
updated t700 firmwares, g502 firmwares, c902 firmwares.

 recently were uploaded c902 r3da028 firmware (many others versions updated),
w595 r3da026,r3da028,r3da029,r3da030 firmware uploaded
t700 firmwares major update, w902 firmwares major update.

retail c905 firmware,fsimages,custpack r1ba034 uploaded

ps.
if anyone have RETAIL c905 - please contact with me or unlocker. 
we need it to make "insecticide" release

signature request will require now 2 credits.
csca unlock will require now 1 credit.

[Gatin®]

updated c905 firmwares and custpacks
uploaded z250 r1f003, z320 r1f003, t303 r2cc001, r2cb001,r306 r1ba008,r300 r2cc001 firmwares

uploaded g700,g900 r6k842 ,p1 r6g05 irmwares.
uploaded w760,c902 r3da028,r3da029,r3da031,r3da032 firmwares,fsimages and custpacks.

uploaded c905 r3ba038 firmware,fsimages and custpacks

ps.
it is coming...

[veniamin]

SE-TOOL_v0.914042




http://rapidshare.com/files/158675651/042.rar

PS:Версия не оффициальная а тестовая

[Sammuel]

v0.915016

- updated phone model names
- updated bypass packages
- minor and major bugfixes
- added script command for visual filesystem manipulating.

- added support for j132 ODM SEMC phone

- added support for unlock/repair/domain change of
ALL CURRENT SEMC A2 phones (cid49,51,52)
solution is standalone.
http://www.mobile-files.com/forum/sh...3&postcount=50

- added support for flash/fstools/unlock/repair of LG EMP-based phones,
at the moment ku580/kf75x/kt52x (cid54) are supported.

- added support for flash/fstools/unlock/repair of SAGEM EMP-based phones,
at the moment my850c (cid60) is supported.

http://ifolder.ru/8839800

[veniamin]

Можно скачивать с рапиды:

http://rapidshare.com/files/159421472/v0.915016.rar

[veniamin]

warning. Due some reasons (hehe) i broke k850 repair,
phones will became 5-locks after bypass operation.
Attached hotfix, only for those,who already downloaded 0.915016 release.
If hotfix refusing to install, you do not need it.

[genayivanovo]

- on some PNX5230 CID combination unlock by patch produced 5-locks
units with "err:19" message. that is fixed now
- k600 loader produced weird version output, that is fixed.
- added trim area images for completely killed a2 phones
(ta_forceopen err: 0006)

flash them as firmware. please note, that k850 trim area image only
working for K850, while for any other semc a2-phone
Shinobu_TA.ssw will do job just fine.

also please note, that for 100% normal work after trim area repair you
must full flash phone, then write gdfs package from normal working phone,
finally you must unlock phone.

i almost sure, thread with gdfs packages for a2 phone will appear soon.

http://rapidshare.com/files/16038296..._v0.915017.exe