5310XM умер при прошивке через NSU
умер 5310XM при прошивке через NSU.
Пытаюсь прошить в DEAD MODE фенике выдает следующее:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Loading image files...
Opening RAW connection...
RAW connection successfully opened!
Waiting for USB device...
--- Press phone's power button! ---
Connection opened to BootCode successfully
Failed to get master device pointer
Close RAW connection!
Failed to send wait request!
ERROR: Check TSS Communication API installation.
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing failed.
если сначала выбирать продукт вручную и потом заходить в режим USB выдает следующее:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Initializing
Getting BB5 Phone Information from Update Server...
Asic CMT: Verifying communication to device...
Asic CMT: UA Protocol 1.0 detected.
Product Type: Product Code: 0547040C
Phone information retrieved
Product mode was not changed because the product is in Adl Mode
Getting BB5 Phone Information from Update Server...
Asic CMT: Verifying communication to device...
Asic CMT: UA Protocol 1.0 detected.
Product Type: Product Code: 0547040C
Phone information retrieved
Flashing phone
Initializing
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Asic CMT: UA Protocol 1.0 detected.
Loading image files...
Error ADL Loader: Phone reported Downgrade not possible. Flash a newer SW version
Protocol 1: Error during Negotiation. Unable to flash.
Unable to flash phone 0x8401227A
All operations completed
Product flashing failed.
P.S. раньше стояла 8.32,через NSU начал обновлять до 09.42,теперь феник ругается на любую из них(08.32 и 09.42)
Ответить с цитированием
Сообщение от Foma88
