Цитата Сообщение от nasirahmed Посмотреть сообщение
Back Up GDFS/Restore GDFS

The GDFS contains the calibration data of your phone. Your phone won’t work if the GDFS is damaged. A defective GDFS is hard to fix, therefore you should always backup the GDFS of your phone before you do anything else.

1. Connect your phone while holding down the ”C” button.
2. Choose the ”GDFS” tab (in ”Configuration” on the bottom right)
3. Click ”Backup GDFS”
4. Store the GDFS file in a safe place – it could safe your phone after a mistake!






Writing the GDFS back to your phone

If GDFS is damaged choose your backed up GDFS file (make sure you’ve choose the right one) in ”Restore GDFS” and click ”Write GDFS”.

NOTE: Every GDFS is unique, that means every phone has a different GDFS, even if it’s the same model. If you write the GDFS from another phone to your phone your phone won’t boot up. That’s because the IMEI stored in the new GDFS doesn’t match the IMEI in your OTP. Do NOT write any other GDFS to your phone.

Choosing the correct firmware

XS++ always shows you the EROM CID and the EROM Colour of your phone after connecting. You need to flash firmware matching that CID and Colour or your phone won’t work properly. If you’ve got a BROWN EROM you need to change it to a RED EROM before flashing red firmware to the phone.

Flashing the firmware to your phone

1. Connect your phone while holding down the ”C” button.
2. After your XS++ successfully recognized your phone it will switch to the ”Flash” tab automatically. Check ”Flash Main Firmware”, ”Flash File System” and ”Customize File System”.
3. Choose your firmware and CDA, then press the ”Flash” button.

Do this if the custpack you need is not implemented in XS++:
4. Download the custpack you need
5. Extract the files into the ”own_custpack” folder in XS++
NOTE: Make sure that the first folder in own_custpack is ”tpa”
6. Do steps 1. and 2.
7. Check ”Customize file system”
8. Select ”Own Custpack” in the ”Select phone Model” dropdown menu
9. Press the ”Flash” button

NOTE: Your phone will NOT work if you don’t customize the files system after flashing the FS. You will get an configuration error after trying to turn it on.


Download Link

xs++ 3.1
http://www.4shared.com/file/32041400...XS_online.html
USB Flash Driver For DCU-60 Cable
http://www.4shared.com/file/27136649.../gg-setup.html
xs++ Flashing