PDA

Просмотр полной версии : 1661-2 после пере прошивки JAF Contact Service


milicis
21.08.2010, 13:21
After flash with JAF easy cable Contact Service ! HELP !
ariya
21.08.2010, 13:27
Put Self test your device.
Sigmateks
21.08.2010, 13:43
and the log of firmware and info
milicis
21.08.2010, 21:53
MCU SW : V 04.30 06-07-09 RH-122 (c) Nokia
PPM SW : V 04.30 06-07-09 RH-122 (c) Nokia EF
Prd.Code: 0578469
Bpr.Code: 0586754
Prod.Sn : RDF808332
HW Vers : 2000
UEM : 1328
UPP : 8851 [2293]
RFIC Ver: 0700
DSP Vers: ICPR81_09w17_U
LCD Type: SDI:BOHAIv92 NT39121
IMEI : 352722-04-461098-1
SL Conf : 001-01-00000000000
SL Prof : 000000000003000-B
SL Var : 00003527220446109800
SL Aux : 000B0000
HW Sig : A1562B25D1199A85
Box Id : FFFFFFFFFFFFFFFF
BLK1= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK2= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK3= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK4= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK5= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK6= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK7= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
Provider: GSM Test Equipment

http://img826.imageshack.us/img826/6845/testif.png
mobilemonyak
22.08.2010, 00:08
Use a different version of firmware
Sigmateks
22.08.2010, 05:01
already have version V 5.01
milicis
23.08.2010, 14:39
I cant flash anymore ! Tried both ufs and jaf boxes Easy Cable

MCU: C:\Program Files\Nokia\Phoenix\Products\RH-122\rh122_005.010
Booting phone...
FAILED ->jaf configuration 2
FAILED ->jaf configuration 1
MCU ID: 0xE1F1
This MCU ID is not supported in chosen flash file...
Error booting phone...
Sigmateks
23.08.2010, 19:06
but you did it like that first time? carefully check the cable
milicis
23.08.2010, 20:49
Yes I did, but I found that I have to take battery out before flashing, it helped, but now im trying to do the same but with no success
BUKHARSKY
23.08.2010, 21:15
Yes I did, but I found that I have to take battery out before flashing, it helped, but now im trying to do the same but with no success

You need to purchase a special box dl reprogramming phones and use im.Perhaps if the process lacks the battery
milicis
23.08.2010, 23:00
Use a different version of firmware

I changed boxes and flashed it with UFS and version V 5.01 , and it works very well !!! Thank You Guys !!!!!