Помогите с кодом для новой версии i68+ / i9+++. Те, что есть - не работают

[photo-e]

Имеется телефон i9+++ какой-то новой прошивки.
По сути - тот же i68+, только в корпусе под iPhone 3G.

Не могу зайти в инженерное меню. Раньше, когда были старые прошивки, помогал код *#82043036#

Сейчас он не работает. Просмотрел множество тем - никакие коды не подходят.

Вот информация:

[VERSION] TG01_V6.1.0
[BRANCH] 08A TG01
BUILD: TG01_V6.1.0-V6.0-GC0307
SERIAL# 0925013
[BUILD TIME]
2009/09/22 11:08

Помогите, пожалуйста с кодом инженерного меню.

[Dinns]

Абсолютно та же проблема.
Принесли Sci Phone i9+++ 2009 г. выпуска. В ВТ обозван как i68+. Из всех кодов понимает только *#06# и *#0000#.

[z3l]

Абсолютно та же проблема.
Принесли Sci Phone i9+++ 2009 г. выпуска. В ВТ обозван как i68+. Из всех кодов понимает только *#06# и *#0000#.

попробуй *#3333# инженерное меню

[blacka]

Report this postReply with quoteService codes "Chinese" models:
by dash4000 on Sun Dec 14, 2008 1:27 pm


***********************************************
THIS IS A WARNING TO ANYONE USING
THESE CODES ON THEIR PHONE
***********************************************
If you enter into Engineer mode
DO NOT SELECT & DO NOT EVEN HIGHLIGHT
the "High Speed SIM" option using the stylus or finger,
you may easily brick your phone,
making it virtually dead,
and you will have to flash it to get it to work again!
Always use the side volume control button to navigate the menus
while in Engineer mode, that way an accidental selection of an
undesired option may not occur, and it is much safer! Only use
the stylus when you absolutely want to select an option!
***********************************************
Many of the settings in this first post have not been tested to work properly
on the i9/i9+ cell phones, read other member posts in the rest of the thread
that have correctly identified codes which work at least on their version of
the i9 phone, as there is less likely to input a code which will make your
phone inoperable! If you brick your phone (make it inoperable) by using an
input code, read the forum FAQ Upgrade & Flashing section (here), because
you may need to flash your phone with a new firmware to get it to work again!
If you find these codes do not work on your phone, & you are looking for specific
codes that do work on your phone, then ask about them in this thread, & do not
open up a new thread on the forum asking about what codes will work.
***********************************************
Engineer mode - While in this mode you can change many of the phone's
default settings, but be careful, you can also brick your phone.
The most common Engineer mode codes for current models are these:
*#82043036#
*#3646633#

Factory mode - In this mode there are also some tests & settings. In this mode
you can also find out more detailed information than just version information,
like what processor chip (CPU) the phone has in it, usually under the BB chip menu,
and some other hardware/software on the phone version numbers.
The most common Factory mode codes for current models are these:
*#66*#
*#66#

The most common Version Information mode code for current models is this:
*#8375#

The most common IMEI number showing mode code for current models is this:
*#06#

***********************************************

Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
more to it
and more:
*#77218114#
*#19992006# dd
*#881188#
#*94267357#
khoi phac lai he thong -> mг lа 1122
*#3646633#
*#33778#

S500 *#77218114#
C600 *#881188#
*#19992006#
#*94267357#
*#881188#
*#77812114#
*#19992006#
*#9426*357#
*#0084# call

*#0000#, *#0044# Default English
*#0086#, *#0886# set to China
*#0084#, *#0966# set to Vietnamese
*#77218114#
*#19992006#
*#881188#
#*94267357#
*#77218114#
*#0000#, *#0044# Default English
*#0086#, *#0886# set to China
*#0084#, *#0966# set to Vietnamese
*#77218114#
*#0084#call

moden s500:reset*#881188#
*#19992006#
*#881188#
#*94267357#
*#77218114#
*#9426*357#


*#9426*357#
*#0084# call


*#0000#, *#0044# Default English
*#0086#, *#0886# set to China
*#0084#, *#0966# set to Vietnamese

*#77218114#
*#19992006#
*#881188#
#*94267357#

I9+++
LN01
*#9928375# - info
*#9923646633# - engeener menu

I9+++ new
MT6225_S00.S9_V_9_0_AR
*#090903# - Engeniring menu
adress 00c1a3db

[ariya]

Ребята,вы видели когда ТС создал тему?Смотрите на даты постов.Тема закрыта.