неудачная попытка прошить nokia 3250...

[Kronas]

Прошивал фениксом Phoenix_Service_Software_2008_4_7_32837 во время прошивки видимо кабель отошел в общем прошивка не закончилась телефон не включается пробую прошить в режиме "Dead Mode" пишет следующее:

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Loading image files...
Waiting for USB device. Press phone's power button (if you start from dead terminal)
ROM Boot Drivers loaded. Creating RAW connection
Connecting to device...
Connection opened
Connection opened to BootCode successfully
First wait command succeeded.
First wait command failed. Preparing for bootrom waiting loop ...
Flashing Secondary boot code: 14272 Bytes
Sending USB data: 29%
Sending USB data: 57%
Sending USB data: 86%
Sending USB data: 100%
Secondary boot loaded
Skipping USB handshake...
Flashing Update Server Data: 204224 Bytes
Sending USB data: 2%
Sending USB data: 10%
Sending USB data: 20%
Sending USB data: 30%
Sending USB data: 40%
Sending USB data: 50%
Sending USB data: 60%
Sending USB data: 70%
Sending USB data: 80%
Sending USB data: 90%
Sending USB data: 100%
Flashing PASUB TOC Data: 22848 Bytes
Sending USB data: 18%
Sending USB data: 36%
Sending USB data: 54%
Sending USB data: 72%
Sending USB data: 90%
Sending USB data: 100%
Update server loaded
Waiting for Update Server to boot...
DEBUG - FUR_CONTROL_SYSTEM_INFO_REQ not supported on device. Skipping detection
Initializing Update Server....
Configuring Algorithm clients....
FUR: Adding Asic CMT as client 0x01...
FUR: PROTOCOL_CONTROL - Error sending message 0x0001 to Client 0x10 - 0x84009427
Error initializing Algorithm. 0x84009427
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Connection was already open...
Phone must be off to perform revive operation with USB
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Connection was already open...
Phone must be off to perform revive operation with USB
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Connection was already open...
Phone must be off to perform revive operation with USB
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing failed.
что можно сделать подсажите

[yurchic]

Попробуй фришным жафом через DEAD USB

[Kronas]

попробовал джафом.... ничего не вышло((((:

JAF version 1.98.62
Detected PKEY: 9000D391
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 6.85.10.0
Changing mode...Done!
Для прошивки выбраны следующие файлы:
MCU (основной файл прошивки) : NONE
PPM (языковой пакет) : NONE
CNT (контент) : NONE
APE Variant file: NONE
Detected P-KEY: 9000D391
P-key nokia module version 01.02
Init usb communication...
Phone Type:
Для прошивки выбраны следующие файлы:
MCU (основной файл прошивки) : C:\Program Files\Nokia\Phoenix\Products\RM-38\rm38_04.60_prod_core.c0r
PPM (языковой пакет) : NONE
CNT (контент) : NONE
APE Variant file: NONE
Detected P-KEY: 9000D391
P-key nokia module version 01.02
Init usb communication...
Phone Type:
Для прошивки выбраны следующие файлы:
MCU (основной файл прошивки) : C:\Program Files\Nokia\Phoenix\Products\RM-38\rm38_04.60_prod_core.c0r
PPM (языковой пакет) : C:\Program Files\Nokia\Phoenix\Products\RM-38\rm38_04.60_prod_variant_05_russian.fpsx
CNT (контент) : NONE
APE Variant file: NONE
Detected P-KEY: 9000D391
P-key nokia module version 01.02
Init usb communication...
Phone Type:
Для прошивки выбраны следующие файлы:
MCU (основной файл прошивки) : C:\Program Files\Nokia\Phoenix\Products\RM-38\rm38_04.60_prod_core.c0r
PPM (языковой пакет) : C:\Program Files\Nokia\Phoenix\Products\RM-38\rm38_04.60_prod_variant_05_russian.fpsx
CNT (контент) : C:\Program Files\Nokia\Phoenix\Products\RM-38\rm38_04.60_LFFS_Image_EMEA.fpsx
APE Variant file: NONE
Backing up CRT...
Detected P-KEY: 9000D391
P-key nokia module version 01.02
Init usb communication...
Failed to backup CRT...
Detected P-KEY: 9000D391
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
Elf2flash 02.35.000 RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting.......................................... ...........Loader Sent!
Stage 3 starting.........Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Phone failed to boot in flash mode CMT...

[zabavinalex]

Если тело убито софтово, то значит в большинстве случаев его можно так же поднять, попробуй через Ф-бас интерфейс каким нибудь программатором