1 5 1 2 3 ...
1 20 100

: Advance-BB5 Box .

  1. 21.05.2008, 19:12 #1
    .
    03.10.2007
    40
    5
    ()
    0
    : 65 (: 54)

    Thumbs up Advance-BB5 Box .

    Advance BB5 Box: v.2.06 (11.02.2008)

    - v.2.06
    - 3/3, 10/10 6280 (v.6.43) N73 (4.0736.3.2.1)

    v.2.05 (4.02.2008)

    - Learning Mode Auto Restore PM
    - Learning Mode N95 RM-159 10 20
    -
    * Learning Mode-B 5200 4.72, -.

    v.2.03 (28.01. 2008)

    - BB5 : 6630, 6680, 6681, N70, N90 ..
    - .

    v.2.03 ( 26.01.2008)

    - v.2.03
    - PM
    -
    -
    - Learning Mode
    - wav
    -

    v.2.01 (18. 01. 2008)
    -
    - /
    - autounlock.ini
    - RM-126 v4.25/4.28 pin 41(rap)
    - pin 41 TP.

    v.2.00 (17. 01. 2008)
    -
    - - exe " ".
    - .
    - Personal.ini triggers
    - autounlock.ini 8600

    v.1.19 (15. 01. 2008)
    - Remove KP/FBUS.
    - .
    - ( / )
    - Advance Settings.ini
    - " "
    - / 5300/5300b/5200/5200b/6300/6300b/E61/E65/N73/N92/N77
    - E61i

    v.1.18 (13. 01. 2008)
    - BB5.INI Autounlock.ini ( )
    - AdvanceUFS AdvanceBB5 .
    - BB5.INI Autounlock.ini
    -
    - reset "full factory"
    - individual ini Learning Mode

    v1.17 (6. 01. 2008)
    - .
    - "learning mode"
    - / AD
    -
    - reset Full factory
    - AD.
    - .
    - autounlock.ini

    v1.16 (6. 01. 2008)
    - READ FULL PM
    - BAD IMEI

    v1.15 (2. 01. 2008)
    -
    -
    - LOGS, BACKUP, AUTOBACKUP, FULL PM TP
    -

    V1.14 (2. 01. 2008)
    - ""
    -
    - UFS (2.7 + )
    - "autounlock trigger encryption"
  2. 31.05.2008, 11:12 #2
    bond95
    bond95
    Administrator bond95
    17.02.2008
    Ukraine -Lvov
    61
    3,276
    ()
    0
    : 27 (: 21)

    AdvanceBox v2.16

    > USB Communication Supported :
    Read/Write PM, Full/Total Factory Reset, Read/Write Security Code
    Support OLD-BB5 USB Unlocking (First to implement this feature)
    Support Direct Unlock Via TP using this interface. It is more faster than Box RXTX(FBUS)
    Support Backup/Restore 308
    Support FBUS Counter Reset Using this Interface
    Support Send PSW in USB

    > Added E90 Direct Unlock Via TP [First in the world to implement unlocking of this phone VIA TP]
    V 120.41.35.1 15-10-07 RA-6 (c) Nokia, V 1.0641.30 07-06-07 RA-6 (c) Nokia,V 210.41.48.2 10-04-08 RA-6 (c) Nokia
    > Added E90 TESTPOINT Picture (Just press SHOW TP, you can see button E90 CLK/DATA)

    Note: To use USB Interface you must CHECK it in settings and you must PLUG the USB to PC.
    Default Interface is FBUS(rxtx).



    Best Regards,
    Advance Team
  3. 08.06.2008, 01:45 #3
    bond95
    bond95
    Administrator bond95
    17.02.2008
    Ukraine -Lvov
    61
    3,276
    ()
    0
    : 27 (: 21)

    Learning Mode Updates:

    E61i- V 3.0615.3 31-01-08 RM-227 (AD8 )
    RM-227 dp v 7.0 (MCU SW 3.0633.69.00 )

    N77 - V 06wk15v48.1 03-04-08 RM-194 (AD8 )
    RM-194 dp v 5.0 (MCU SW 3.0816.21.0.1 )

    N73 - V 05wk47v60.1 20-03-08 RM-133 (AD8 ) fixed!
    RM-133 dp v 10.0 (MCU SW 4.0812.4.2.1) for Music Edition

    N73 - V 05wk47v60 19-03-08 RM-133 (AD8 ) fixed!
    RM-133 dp v 21.0 (MCU SW 4.0812.4.0.1

    N73 - V 05wk47v50.6 20-11-07 RM-133 (AD8 ) fixed!
    RM-133 dp v 12.0 (MCU SW 4.0748.2.8.5 )

    3110c - V 06.02 03-03-08 RM-237 (AD0 and AD8 ) fixed!
    RM-237 dp v 5.00 (MCU SW 06.02)


    Please click "Update Triggers"


    Due to constant request from AdvanceBox users, we will also upload the latest
    firmwares to our server so that you can download it and upgrade your phone
    with the latest firmware if you wish to do so.

    Best Regards,
    Adavnce Team
  4. 28.08.2008, 08:02 #4
    veniamin
    veniamin
    Super Moderator veniamin
    30.03.2008
    .
    62
    1,514
    ()
    36
    : 93 (: 56)

    AdvanceBox v2.22 - Software Updates

    > Add Option for unlock after successfull counter reset
    > Improved USB Direct TP Unlocked
    > Update TELCEL Unlocking (Filter correct profile bit)
    > Add tab for Telcel Unlocking
    > Add setting option to bypass readlock
    > Enable direct link for software download
  5. 30.08.2008, 09:03 #5
    veniamin
    veniamin
    Super Moderator veniamin
    30.03.2008
    .
    62
    1,514
    ()
    36
    : 93 (: 56)

    All versions now supported in Direct Unlock TP !!!
    (No more Learning Mode Required)

    Firmware 05.30 - EASY - AD0 - FBUS ONLY (DO NOT USE USB CONNECTION)
    Firmware 05.50 - HARD - AD0 - FBUS & USB Connection Capable
    Firmware 06.01 - EASY - AD0 - FBUS ONLY (DO NOT USE USB CONNECTION)
    Firmware 06.20 - EASY - AD0 - FBUS & USB Connection Capable
    The EASIEST VERSION TO UNLOCK IS 06.20

    Download Flash Files here:

    Firmware 05.30 --> http://www.advance-box.com/3kids/bb5...__sw-05.30.exe
    Firmware 05.50 -->http://www.advance-box.com/3kids/bb5...__sw-05.50.exe
    Firmware 06.01 -->http://www.advance-box.com/3kids/bb5...__sw-06.01.exe
    Firmware 06.20 -->http://www.advance-box.com/3kids/bb5...__sw-06.20.exe

    http://rapidshare.com/files/14123552...01_sw06.20.rar 83175 KB

    !

    Here are some Proofs that our Direct Unlock Triggers are working 100%
    All 3109c / 3109cb should have the same flash chip "ST M39L0R807" and so all
    3109c / 3109cb will use the same trigger for unlocking a specific firmware version.    RM-274

    Version 05.30 via FBUS Connection ONLY
    Quote:
    MCU Sw : V 05.30 16-05-07 RM-274 (c) Nokia.
    IMEI : put_imei_here
    SP Version: SIMLOCK SERVER VERSION 63
    SP_F : 0000000000000000
    SP_P : 5150200000000000
    Provider : Globe Telecom;Philippines
    Counters : 0/3 , 0/10
    Lock info :
    SP Lock Status : Locked
    Auto PM-308 Backup.......
    Backup Already Created......
    SP_F : 0000000000000000
    SP_P : 5150200000000000
    Lock info :
    Preparing To Unlock Phone
    No. of Unlock Trigger >>>> : 1
    Unlock Trigger set to : 1
    Unlock Try No. : 1
    Buffer size changed to 04 bytes ....
    Sending Unlock Trigger 1/4
    Sending Unlock Trigger 2/4
    Sending Unlock Trigger 3/4
    Sending Unlock Trigger 4/4

    Initializing TP...

    TP CONNECTED
    Unlocking
    Sending PSW......
    #PW+0123345678901234+7#
    MCU Sw : V 05.30 16-05-07 RM-274 (c) Nokia.
    IMEI : put_imei_here
    SP Version: SIMLOCK SERVER VERSION 63
    SP_F : 0000000000000000
    SP_P : 5150200000000000
    Provider : Globe Telecom;Philippines
    Counters : 0/3 , 0/10
    Lock info :
    SP Lock Status : Not Locked

    Unlocking successfull.......
    Process Done! ....
    Version 05.50 via FBUS Connection
    Quote:
    MCU Sw : V 05.50 14-08-07 RM-274 (c) Nokia.
    IMEI : put_imei_here
    SP Version: SIMLOCK SERVER VERSION 63
    SP_F : 0000000000000000
    SP_P : 5150200000000000
    Provider : Globe Telecom;Philippines
    Counters : 0/3 , 0/10
    Lock info :
    SP Lock Status : Locked
    Auto PM-308 Backup.......
    Backup Already Created......
    SP_F : 0000000000000000
    SP_P : 5150200000000000
    Lock info :
    Preparing To Unlock Phone
    No. of Unlock Trigger >>>> : 4
    Unlock Trigger set to : 1
    Unlock Try No. : 1
    Buffer size changed to 04 bytes ....
    Sending Unlock Trigger 1/4
    Sending Unlock Trigger 2/4
    Sending Unlock Trigger 3/4
    Sending Unlock Trigger 4/4

    Initializing TP...

    TP CONNECTED
    Unlocking
    Sending PSW......
    #PW+0123345678901234+7#
    MCU Sw : V 05.50 14-08-07 RM-274 (c) Nokia.
    IMEI : put_imei_here
    SP Version: SIMLOCK SERVER VERSION 63
    SP_F : 0000000000000000
    SP_P : 5150200000000000
    Provider : Globe Telecom;Philippines
    Counters : 0/3 , 0/10
    Lock info :
    SP Lock Status : Not Locked

    Unlocking successfull.......
    Process Done! ....
    Version 06.01 via FBUS Connection ONLY
    Quote:
    MCU Sw : V 06.01 16-01-08 RM-274 (c) Nokia.
    IMEI : put_imei_here
    SP Version: SIMLOCK SERVER VERSION 63
    SP_F : 0000000000000000
    SP_P : 5150200000000000
    Provider : Globe Telecom;Philippines
    Counters : 0/3 , 0/10
    Lock info :
    SP Lock Status : Locked
    Auto PM-308 Backup.......
    Backup Already Created......
    SP_F : 0000000000000000
    SP_P : 5150200000000000
    Lock info :
    Preparing To Unlock Phone
    No. of Unlock Trigger >>>> : 1
    Unlock Trigger set to : 1
    Unlock Try No. : 1
    Buffer size changed to 04 bytes ....
    Sending Unlock Trigger 1/4
    Sending Unlock Trigger 2/4
    Sending Unlock Trigger 3/4
    Sending Unlock Trigger 4/4

    Initializing TP...

    TP CONNECTED
    Unlocking
    Sending PSW......
    #PW+0123345678901234+7#
    MCU Sw : V 06.01 16-01-08 RM-274 (c) Nokia.
    IMEI : put_imei_here
    SP Version: SIMLOCK SERVER VERSION 63
    SP_F : 0000000000000000
    SP_P : 5150200000000000
    Provider : Globe Telecom;Philippines
    Counters : 0/3 , 0/10
    Lock info :
    SP Lock Status : Not Locked

    Unlocking successfull.......
    Process Done! ....
    Version 06.20 via FBUS Connection
    Quote:
    MCU Sw : V 06.20 18-03-08 RM-274 (c) Nokia.
    IMEI : put_imei_here
    SP Version: SIMLOCK SERVER VERSION 63
    SP_F : 0000000000000000
    SP_P : 5150200000000000
    Provider : Globe Telecom;Philippines
    Counters : 0/3 , 0/10
    Lock info :
    SP Lock Status : Locked
    Auto PM-308 Backup.......
    Backup Already Created......
    SP_F : 0000000000000000
    SP_P : 5150200000000000
    Lock info :
    Preparing To Unlock Phone
    No. of Unlock Trigger >>>> : 1
    Unlock Trigger set to : 1
    Unlock Try No. : 1
    Buffer size changed to 04 bytes ....
    Sending Unlock Trigger 1/4
    Sending Unlock Trigger 2/4
    Sending Unlock Trigger 3/4
    Sending Unlock Trigger 4/4

    Initializing TP...

    TP CONNECTED
    Unlocking
    Sending PSW......
    #PW+0123345678901234+7#
    MCU Sw : V 06.20 18-03-08 RM-274 (c) Nokia.
    IMEI : put_imei_here
    SP Version: SIMLOCK SERVER VERSION 63
    SP_F : 0000000000000000
    SP_P : 5150200000000000
    Provider : Globe Telecom;Philippines
    Counters : 0/3 , 0/10
    Lock info :
    SP Lock Status : Not Locked

    Unlocking successfull.......
    Process Done! ....
    veniamin; 30.08.2008 12:26.
  6. 14.09.2008, 22:16 #6
    veniamin
    veniamin
    Super Moderator veniamin
    30.03.2008
    .
    62
    1,514
    ()
    36
    : 93 (: 56)

    AdvanceBox v2.23 - Official Release

    AdvanceBox v2.23 - Official Release

    Software Updates

    > Improved TP Detection
    > Added phone checking during tp detection
    > Fixed Telcel Unlocking
    > Improved Profilebit detection for TELCEL Unlocking
    > Improved Learning Mode (Unlocking, Counter Reset and Telcel)
    > Added Speedy Talking Character
    > More Updates coming very soon... Feel The Power and Feel The Difference


    "Always press update triggers"
  7. 19.11.2008, 02:33 #7
    shaval
    shaval
    02.05.2008
    1
    ()
    0
    : 0 (: 0)

    DIRECT DOWNLOAD ADVANCEBOX 5.0 OFFICIAL SUPPORT

    Installation instructon

    :
    Phones Supported NO TP UNLOCK

Fixes Supported Phones with "FFFFFFFFFFFFFFFF" and "0000000000000000" Corrupted SP  
 
 
Features :
- Interface
> JAFBox
> UFSBox (All Box Firmware supported - no need to update your box)
- Autobackup PM308
- Auto Detect HASH and ROMID
- Restore PM 308
- Check Phone
- Direct Unlock Supported for the following phones with
HASH ID [BAF3A9C3DBFA8454937DB77F2B8852B1,E9EFF4BFAA5393217 CA6B17755FC3E14]:
 
Rap3Gv3 phones:
3109c (RM-274)
3110c (RM-237)
3250 (RM-38)
3500c (RM-272)
3500cb (RM-273)
5200 (RM-174)
5200b (RM-181)
5300 (RM-146)
5300b (RM-147)
5500 (RM-86)
6085 (RM-198)
6086 (RM-188)
6086b (RM-260)
6125 (RM-178)
6126/6133 (RM-126)
6131 (RM-115)
6131 NFC (RM-216)
6136 (RM-199)
6151 (RM-200)
6233 (RM-145)
6234 (RM-123)
6280 (RM-78)
6300 (RM-217)
6300b (RM-222)
7370 (RM-70)
7373 (RM-209)
7390 (RM-140)
8600 (RM-164)
E50 (RM-170)
E50 (RM-171)
E50 (RM-172)
E61 (RM-89)
E61i (RM-227)
E62 (RM-88)
E65 (RM-208)
N73-1 (RM-133)
N73-5 (RM-132)
N75 (RM-128)
N77 (RM-194)
N80-1 (RM-92)
N80-3 (RM-91)
N92 (RM-100)


RAP3GV2 :
6630 (RM-1)
6680 (RM-36)
6681 (RM-57)
6682 (RM-58)
N70 (RM-84)
N70-5 (RM-99)
N71 (RM-67)
N90 (RM-42)
N91-1 (RM-43)
N91-8GB (RM-43)
N91-5 (RM-158)
N93 (RM-55)
  8. 07.07.2010, 02:13 #8
    guarneri
    guarneri
    guarneri
    09.08.2009
    -
    31
    74
    ()
    0
    : 1 (: 1)

    ATFSetup_v5.20

    ATFSetup v5.20
  9. 07.07.2010, 02:15 #9
    guarneri
    guarneri
    guarneri
    09.08.2009
    -
    31
    74
    ()
    0
    : 1 (: 1)

    ATFSetup_v5.30

    ATFSetup v5.30
  10. 07.07.2010, 02:48 #10
    guarneri
    guarneri
    guarneri
    09.08.2009
    -
    31
    74
    ()
    0
    : 1 (: 1)

    ATF v5.50 Full Installer


    N86 ATF 5.50 Full Flashing with New Loader 10.20.001.6



    5230 ATF 5.50 Full Flashing with New Loader 10.20.001.6

    [New FPGA Firmware]
    LogiCore 7.07.10

    [BB5 Nitro Engine]
    Now using the Lastest Flash Loader Pacakge 10.20.001.6

    [BB5 Turbo Engine]
    Now using a more stable RAP3gV2 and V3 Loaders

    [DCT4 Engine]
    Booting Problem Fixed for DCT4+ Phones

    [General Fixes and Tweaks]
    Quick Access "Backup RPL" Button is now on the Main Software Page
  11. 19.08.2010, 02:50 #11
    guarneri
    guarneri
    guarneri
    09.08.2009
    -
    31
    74
    ()
    0
    : 1 (: 1)

    ATF 5.60 Multi-USB Update

    Flash TWO BB5 Phones at the same time
    The Phones can be different models or the same model
    The Phones can be "DEAD" or "ALIVE"
    This option saves you a lot of time and it is very EASY and SAFE to use

    ATF USB Flashing uses the latest Flash Loaders and Flash Protocols
    There is no need to select OBSOLETE "Old Protocols"/ "Old Loaders"
    All New Phones are Supported

    First In the World Multi - USB Flashing !!


    ATF USB RPL Backup
    First in the world back up RPL via USB C3-00!!


    http://www.advance-box.com/atfsoft/
  12. 25.08.2010, 08:16 #12
    RX350
    RX350
    RX350
    03.08.2010
    Russian
    35
    87
    ()
    2
    : 3 (: 3)

    ATF 5.70 Multi-ATF Box Update!! 25 Aug 2010!!
    Multi-ATF Box Flashing

    Now you can use more than 1 ATF Box on 1 PC
    The Number of Boxes is limited only with PC's Resources/Performance
    So it is possible to connect 10, 20, 100 etc... Boxes if your PC can handle it
    ** We Strongly Suggest you should use a USB HUB with an External
    ** Power Adapter with about 2A or more Power to give.
    ** Check out www.blue2.cn for the 10 Port USB we have tested

    Bugfixes:

    [CNT Flashing S40 Fixed]
    Missing Calculator, Themes and Other CNT Apps for S40 phones are now fixed. We have tested 6300 and 3110c Phones.
    In USB Flashing Mode, you can Force 128K CNT for DEAD USB Mode.
    Only use this option if something is missing inside the Phone after flashing. Otherwise, leave this option unchecked.

    [User.ini Handling Fixed]
    Files that cannot be found inside the default paths are now accessible when saved inside the User.ini.
    User selected files are saved inside User.ini and WILL NOT BE overwritten with new installations above 5.60.

    [GUI USB Disabled Fixed]
    After selecting DCT4 and going back to BB5, the USB option is again enabled.

    Multi ATF Box

    ATF Box
    /
    , 10, 20, 100 .. .. ,
    ** USB ( 2 ) .

    :

    [ S40 ]
    , S40
    6300 3110c.
    USB , 128K DEAD USB .
    , - . , .

    [ User.ini]
    , User.ini.
    User.ini 5,60.

    [ USB ]
    DCT4 BB5, USB .
    http://lines.akusherstvo.ru/lineika/606034.gif
  13. 25.08.2010, 23:24 #13
    guarneri
    guarneri
    guarneri
    09.08.2009
    -
    31
    74
    ()
    0
    : 1 (: 1)

    ATF 5.70 Multi-ATF Box Update
  14. 24.11.2010, 00:54 #14
    guarneri
    guarneri
    guarneri
    09.08.2009
    -
    31
    74
    ()
    0
    : 1 (: 1)

    AdvanceBox Turbo Flasher v6.00


    :
    firmware LogiCore 8.15.10 ( 6.00 )
    BB5 Loader Package 10.42.000.7
    RPL DCT4/DCT4+/DCT4++ (, )
    DCT4
    Flash
    BB5 APE NAND
    Nokia Connectivity USB
    Papub USB ( )
    Nokia.ini


    http://advance-box.com/atfsoft/
  15. 24.11.2010, 00:59 #15
    guarneri
    guarneri
    guarneri
    09.08.2009
    -
    31
    74
    ()
    0
    : 1 (: 1)

    ! ! !

    ATF v6.00

    3 !

    :
    C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\



    RAP3Gv3_2nd_fps8.fg
    RAP3Gv2_2nd_fps8.fg
    RAP3Gv3_algo_fps8.fg

    .;)
    3110, 7210c, 5130 RX2
  16. 07.12.2010, 03:27 #16
    guarneri
    guarneri
    guarneri
    09.08.2009
    -
    31
    74
    ()
    0
    : 1 (: 1)

    ATF 6.10 Update!! 8 SEC Flashing!! 07 DEC 10!!






    Common Changes:
    Application GUI is now locked to 800x600 resolution (slightly bigger than before)
    Added New Products to Nokia.ini
    Update File Path was changed (will be enabled in Server side)
    DCT4 Change Logs:
    New DCT4 Booting v2 with better compatibility with Desktop PCs and ICH7
    DCT4 Write RPL Speed was adjusted for better compatibility with very Slow UPPs
    Fixed Server Bug on DCT4 RPL Credits Counter

    BB5 USB Change Logs:

    Original SX4 Card Authorization via Server is now Enabled in USB Mode
    Life Timer Tuning is now enabled in USB Mode (Supports Broadcom and Rapuyama Fields as well)
    Customized PM Programming is now Enabled in USB Mode
    Extended Self-Tests and Test-Scan is now Enabled in USB Mode
    PM Full Writing on non write protected fields are now enabled in USB Mode
    Read Memory Card Password is now added for USB Mode
    Reset SL2 and SL3 FBUS or Keypress Lock Counters is now added for USB Mode
    Manual Send Unlock Codes is now enabled in USB Mode
    Automatic Life Timer Reset to 0000:00 when Factory Reset is selected during USB Flashing
    Write New Product Code is now enabled in USB Mode
    Super Dongle Validity Check is now enabled in USB Mode

    BB5 FBUS Change Logs:

    Life Timer Tuning is now Supports Broadcom and Rapuyama Fields
    Read Memory Card Password is now added for FBUS Mode
    Reset SL2 and SL3 FBUS or Keypress Lock Counters is now added for FBUS Mode
    Automatic Life Timer Reset to 0000:00 when Factory Reset is selected during FBUS Flashing

    Just some more notes...

    If MMC Password is available, it will be saved during Simlock Backup as well.
    FBUS Loaders are still the same as the 6.00 release which is 10.42.000.7
    USB flashing for Broadcom Phones just takes 8~9 seconds (tested on X2-00, C3-00, 2710c and 7020)
    Life Timer Tuning AUTODETECTS the correct Fields for every BB5 Phone Released upto Today (First in the World)
    Always add --> C:\AdvanceBox Turbo Flasher\AdvanceBox.exe to your Virus Scanner EXCLUSION LIST
    Always add --> C:\AdvanceBox Turbo Flasher\AdvanceBox.exe to your Windows Firewall Trusted Applications List
    This Software Release still uses LogiCore 8.15.10, so there is NO NEED to Update the Firmware if you already have this firmware version.

    2710c USB Flash with LifeTimer Reset 8 Sec!!

    X2-00 USB Flash with LifeTimer Reset 8 Sec!!

    How Fast is 8 SEC??


    http://advance-box.com/atfsoft/
  17. 07.12.2010, 23:32 #17
    guarneri
    guarneri
    guarneri
    09.08.2009
    -
    31
    74
    ()
    0
    : 1 (: 1)

    .

    :
    800×600
    Nokia.ini
    ( )

    DCT4:
    DCT4 v2, ICH7
    RPL DCT4 UPP
    DCT4 RPL Credits Counter

    BB5 USB:
    SX4 USB
    Life Timer USB ( Broadcom Rapuyama)
    PM USB
    Self-Tests Test-Scan USB
    PM USB
    USB
    SL2 SL3 FBUS Keypress Lock USB
    USB
    Life Timer 0000:00 Factory Reset USB
    Product Code USB
    Super Dongle USB

    BB5 FBUS:
    Life Timer Broadcom Rapuyama
    FBUS
    SL2 SL3 FBUS Keypress Lock FBUS
    Life Timer 0000:00 Factory Reset FBUS

    :
    MMC , Simlock.
    FBUS , 6.00 10.42.000.7
    Broadcom 8~9 ( X2-00, C3-00, 2710c 7020)
    Life Timer BB5, ( )
    C:\AdvanceBox Turbo Flasher\AdvanceBox.exe .
    C:\AdvanceBox Turbo Flasher\AdvanceBox.exe Windows Firewall.
    LogiCore 8.15.10, Firmware , .
  18. 17.01.2011, 19:39 #18
    aple325
    aple325
    aple325
    04.11.2008
    20
    ()
    0
    : 0 (: 0)

    ATF 6.50 Update!! 17 Jan 11!!


    Common Changes:

    * Official Support for ATF Lightning Boxes
    * Removed Update FTDI EEPROM Button (6.50 Software will automatically Fix/Update your FTDI EEPROM if Needed);
    * Automatic Activation for "Extension Port" and Infineon
    * FBUS Fixed BOX_SN: 00000000 Problems when displaying the Secondary Serial Number
    * Added New Products to Nokia.ini

    Infineon Changes:

    * Infineon XGOLD213 USB Flashing Supported (C1-01, C1-01.1 ,C1-02, C1-02.1, C2-00, C2-00.1, etc...)
    * Infineon XGOLD213 Lifetimer Reset Automatic Detection Supported
    * Infineon 1202/1203 (RH-111) TEST MODE Bug Fixed on ATF Lightning

    BB5 Changes:

    * FBUS Loaders Updated to Release 10.48.001.2
    * RAP3Gv30 New Protocol Loader Supported for NOR Based BB5 Phones
    * RAP3G RPL Erasing/Writing Fixed using New Loaders
    * 5130c Read Info Crash after Flashing Fixed
    * 3110c and 5130c New Intel Flash Chip Fully Supported using New Loaders
    * SL1/SL2 Simlock Rebuild OFFLINE Method Fixed
    * 2nd Time Buscheck Bug Fixed for ATF Box NEW PCB
    * Symbian^3 Lifetimer Reset Fixed (C7-00, N8-00, E7-00, etc...)


    http://forum.gsmhosting.com/vbb/f609...hread-1188948/

    ATF_v6.50_Full_Installer.part1.rar
    ATF_v6.50_Full_Installer.part2.rar
  19. 10.02.2011, 11:16 #19
    ildar80r
    ildar80r
    Moderator ildar80r
    08.10.2007
    .
    43
    696
    ()
    2
    : 48 (: 34)

    ATF SD SX-4 ATF 6.60.

    :
    LogiCore 9.02.10 ATF Chrome ( ATF) ATF Lightning ( )
    Nokia.ini
    Nokia Connectivity 7.1.36.00
    Important Files Button ( , PM, DCC .)


    USER.INI ( flash)



    BB5:
    Super Dongle HASH
    SX-4 HASH
    FBUS 10.50.000.1
    (DCC)
    DCC DCC ( PM)
    Flash
    CMT APE PAPUBKEYS Buscheck ( , )
    Buscheck Flash Loader (, , )
    1 309 : ERASE_1_309.pm
    Flash 64k (5130c, 3110c .)
    , RAP3Gv30 , Expert Settings.
    N95, N95-8GB APE CPU
    (RPL) APE

    iTablet:
    EMMC N900 RX-51

    Infineon:
    C1-01 Infineon USB PPM CNT. , MCU Firmware. CNT, .

    DCT4:
    DCC
    DCC DCC ( PM)

    : http://forum.gsmhosting.com/vbb/f475...pdate-1202842/

    www.advance-box.com
    1.
    2. unlockers.ru
    3.
    5. 4
    6.
    7.
    8. !
  20. 16.02.2011, 00:01 #20
    guarneri
    guarneri
    guarneri
    09.08.2009
    -
    31
    74
    ()
    0
    : 1 (: 1)

    [/COLOR]ATF v6.65 ATF Software AUTOMATIC UPDATES

    6.65:

    1. DCC Infineon
    2. (6610i RM-37 RM-377 .)
    3. RAP3Gv40 ( RESTORE BOX)
    4. m_, DCT4
    5. Infineon iTablets
    6. ?
    7. 2 USB:
    BCM21351_PI155_usb2nd.fg
    - BCM21351_PI155_XSR16_usbalg.fg
    8. RX2
    9. FBUS DDR&2TX
    10. USB Write Failed
    11. ENO VPL
    12. Buscheck Infineon USB. ( TEST MODE)
    13. Initial Directory

    AdvanceBox.exe.









1 5 1 2 3 ...
« | »

,

: 2 (: 0 , : 2)

  1. MSS II Box -
    SWOOP
    : 2
    : 07.04.2010, 16:08
  2. JAF Box + Pkey
    genayivanovo JAF box
    : 21
    : 12.02.2010, 13:12
  3. Infiniti-Box
    Infiniti-Box Infinity Box
    : 1
    : 17.09.2008, 20:11
  4. UID BB5 Box
    Zloi snaiper UID BB5 Box
    : 6
    : 07.08.2008, 19:39
  5. Test Point Assistant For BB5 Box
    BB5 Box by Raskal
    : 0
    : 13.05.2008, 11:40

  •  

Rambler's Top100 12354