Показано с 1 по 12 из 12

Тема: Samsung Rocker supported models and operations !

  1. #1
    Gold Member Аватар для Gatin®
    Регистрация
    02.04.2008
    Адрес
    Ukraine, Donetsk
    Возраст
    40
    Сообщений
    722
    Поблагодарил(а)
    0
    Благодарностей: 1 (сообщений: 1)

    По умолчанию Samsung Rocker supported models and operations !

    SamsungRocker 1.04 supported models and operations
    ---------------------------------------------------

    Samsung 3G (UNLOCK/REBUILD IMEI):
    ---------------------------------
    A501, A701, A707, Z150, Z230, Z330, Z560, Z600, Z620, Z710, Z720, ZV50, ZX20, Z330, Z350, Z360, Z400, Z400V, ZV40, Z550, Z520, Z540, Z560V, P910, P920, Z540V


    Samsung Skyworks (READ INFO/UNLOCK/REBUILD IMEI/SERVICE JOBS):
    --------------------------------------------------------------
    C100, C108, C110, P510, P518


    Samsung "Old" (UNLOCK):
    -----------------------
    A200, A210, N200, N288, N300, N400, N500, N600, N611, N620, N625, N628, R200, R201, R208, R210, R220, R225, T100, T108, T400, T408, T410, T500, T508


    Samsung Swift (UNLOCK):
    -----------------------
    E207, E250, E250V, E340, E350, E350E, E360, E370, E378, E380, E390, E500, E640, E650, E730, E750, E760, E780, E890, D500, D500E, D508, D510, X700, D600, D600E, D820, D900, D900i


    Samsung Sysol1 (UNLOCK):
    ------------------------
    D488, E330, E330N, E335, E338, X490, X495, X496, X497, X640, X648, X667, S500, S508


    Samsung Sysol2 (UNLOCK/REBUILD IMEI):
    -------------------------------------
    E100, E105, E108, E630, E635, E638, E700, E708, E800, E808, E820, E828, X100, X105, X108, X460, X461, X466, X468, X600, X608, X620, X628


    Samsung Qualcomm (READ LOCK CODES):
    -----------------------------------
    Z100, Z105, Z105T, Z105U, Z107, Z107M, Z107V, Z110, Z130, Z130X, Z140, Z140V, Z150, Z300, Z300M, Z310, Z500, Z500V, Z700, ZX10, ZM60


    Samsung "old" Agere (UNLOCK/LOCK/READ INFO/REBUILD IMEI/SERVICE JOBS):
    ----------------------------------------------------------------------
    D100, D410, D415, D418, D428, E105, E300, E300F, E308, E305, E310, E316, E400, E600, E600F, E710, E715, E810, E810C, E810F, E850, I505, I700, P100, P107, P108, P400, P408, Q100, Q200, Q300, Q400, Q605, S100, S105, S108, S200, S205, S208, S300, S300M, S305, S308, V100, V108, V200, V200C, V205, V206, V208, X105, X120, X400, X408, X426, X426M, X427, X430, X438, X450, X458


    Samsung "new" Agere (UNLOCK/LOCK/READ INFO/REBUILD IMEI/SERVICE JOBS):
    ----------------------------------------------------------------------
    C260, C180, C170, U600, U100, E840, E490, E498, M300, C510, C520, C120, C130, C140, C200, C200N, C210, C216, C225, C230, C240, C250, C300, C400, D307, D347, D357, D407, D520, D528, D550, D710, D720, D730, D800, D807, D830, D840, D910, E116, E315, E317, E318, E320, E356, E418, E470, E478, E530, E560, E570, E610, E620, E720, E728, E720C, E770, E860, E860V, E870, E880, E900, E906, E910, F300, I300, I300X, I310, I320, N700, N707, N710, P207, P300, P308, P310, P318, P705, P710, P720, P730, P735, P738, P777, P900, S341, S342, S400I, S401I, S410I, S500I, S501I, T519, T609, T619, T629, T719, X138, X140, X150, X156, X160, X160B, X200, X210, X300, X461, X466, X475, X478, X480, X481, X486, X488, X500, X507, X510, X520, X530, X610, X630, X636, X660, X660V, X680, X680N, X680V, X686, X688, X770, X800, X810, X820, X830, X838, X830N, X840, X900


    Soft is smartcard protected, uses REAL msl calculation algo, not bypass, so new firmware version are supported too. Agere flashing (including CTS flashing too) is under test and soon will be released too. Other platforms flashing is on the way too. Regular updates with added new phonetypes and firmwares support.

  2. #2
    Administrator Аватар для bond95
    Регистрация
    17.02.2008
    Адрес
    Ukraine -Lvov
    Возраст
    61
    Сообщений
    3,276
    Поблагодарил(а)
    0
    Благодарностей: 27 (сообщений: 21)

    По умолчанию

    Он же сломан ..о каком апдейте идет речь непонятно ..

  3. #3
    Gold Member Аватар для Gatin®
    Регистрация
    02.04.2008
    Адрес
    Ukraine, Donetsk
    Возраст
    40
    Сообщений
    722
    Поблагодарил(а)
    0
    Благодарностей: 1 (сообщений: 1)

    По умолчанию

    Hi,

    We're preparing major updates with many unique features. As for now, we need beta testers to test QUALCOM phones flashing.

    You can download beta releases from http://www.turbo-support.com/beta

    Please use it carefully and dont mess with phone USB Boots if really not needed.

    All models up to U700 and similar is supported for now.

    Please read more at official forum :
    http://www.unlockforum.com/showthread.php?p=32279

  4. #4
    Gold Member Аватар для Gatin®
    Регистрация
    02.04.2008
    Адрес
    Ukraine, Donetsk
    Возраст
    40
    Сообщений
    722
    Поблагодарил(а)
    0
    Благодарностей: 1 (сообщений: 1)

    По умолчанию

    Hi,

    As from today, for Samsung Rocker there is no need for additional activation strings. It will work on all Rocker Dongle cards !

    We also wish to welcome back old coder to team !

    Here is latest BETA version, with few fixes and AGERE models improvement. We still need test reports with QUALCOM flashing. Posting logs from software is welcomed !

    Please download attached archive, and ofcourse :

    Enjoy using Rocker Dongle !
    Код:
    1.12.
    - Added support for flashing msm6250/6250A family, tested on z240, boot flashing working
    - new look of 3g qualcomm control dialog, regular readioGroup used just renamed to sRadioGroup1 due compatibility issues
    - smaller dimensions for sGroupBox5
    - commonData.pas, for all '3g' models added flash support,
    - Tab added (Other, 3g Qualcomm) for easier phone picking, due this change 3g qualcomm control dialog shows on TabControl
    
    1.13.
    - Reset bug (Reset never happens) after Boot Flash repaired
    - Added "softReset", Reset Phone to Download mode. Only after Boot Flashing
    - Added reading phone model and address from Flash File, msm_*_addr arrays in specificData.pas are now absolute. Also MSM_*_BOOT_ADDR arrays in specificData.pas are absolute now
    
    1.14.
    - Key Slot changed from 0x5 to 0x1
    - Larger statusBar for 3g Qualcomm flashing
    
    1.15.
    - Slot 0x5 RSA masks Convert to Slot 0x1
    - Changed NewAgere communication
    
    1.16.
    - removed many agereMSL check (new variable: globalAgereMSL:boolean)
    - added A127,B100,C188,C266,C506,P705,P710 support
    Вложения Вложения

  5. #5
    Начинающий
    Регистрация
    23.12.2007
    Адрес
    Киев
    Возраст
    39
    Сообщений
    238
    Поблагодарил(а)
    0
    Благодарностей: 0 (сообщений: 0)

    По умолчанию

    *09.11.2008 Samsung Rocker v1.20*

    *Whats new :*

    Added support for JCOP smart cards
    GUI Changed
    Added QUALCOM Phones flashing
    Added new Agere platform unlock and IMEI repair
    Added QUALCOM MSL2 unlock and IMEI repair, new models:

    * A411
    * A412
    * A701
    * A706
    * A707
    * A707C
    * A711
    * A717
    * A727
    * A736
    * A737
    * A747
    * A790
    * A801
    * A801
    * A811
    * A812
    * A817
    * F330
    * F338
    * F400
    * F480
    * F490
    * F490V
    * F510
    * F550
    * F700
    * F700V
    * G400
    * G800
    * G808
    * J200
    * J208
    * J630
    * L170
    * L170V
    * L400
    * L400V
    * L760
    * L760V
    * L768
    * L770V
    * L810
    * L810
    * L810V
    * P960
    * T639
    * T819
    * U700
    * U700B
    * U700V
    * U800
    * U900
    * U900V
    * Z170
    * Z240E
    * Z720M
    * Z740
    * ZV60



    There might be some more models that we're not aware of it, but we can unlock it anyway.

    *All operations require simple USB cable. Prior to connecting phone to PC, it is required to enter special test mode by entering keypad sequence :
    *#782872# and after phone changes mode, connect it to PC with USB cable.*

  6. #6
    Начинающий
    Регистрация
    23.12.2007
    Адрес
    Киев
    Возраст
    39
    Сообщений
    238
    Поблагодарил(а)
    0
    Благодарностей: 0 (сообщений: 0)

    По умолчанию

    14.11.2008 Samsung Rocker v1.23

    Whats new:


    Added PhoneLock and SimLock password reset to 00000000 (and disabled)
    Added USB boot flashing for QUALCOM models
    Fixed some bugs causing "Access Violation" errors.
    Now few words about removing user code and new features:

    - USB cable and phone in CDMA mode, phone has user lock
    To unlock this phone, You must reset user password and disable it, by clicking "Unlock" and then "Do Job" After this restart phone, and now You can enter QUALCOM mode.
    - USB combo cable
    All operations can be done in CDMA mode (not need special code for QUALCOM mode)

    So now our software supports both modes to unlock Qualcom based samsung phones.
    In case You use COMBO cable, prior to processing any Job, You need to selct UART port. USB Modem port is selected automagicaly by software.

    Please download SamsungRocker_v1.23.exe from support.

    Enjoy using Rocker Dongle !

  7. #7
    Gold Member Аватар для Gatin®
    Регистрация
    02.04.2008
    Адрес
    Ukraine, Donetsk
    Возраст
    40
    Сообщений
    722
    Поблагодарил(а)
    0
    Благодарностей: 1 (сообщений: 1)

    По умолчанию

    14.11.2008 Samsung Rocker v1.23

    Whats new:


    Added PhoneLock and SimLock password reset to 00000000 (and disabled)
    Added USB boot flashing for QUALCOM models
    Fixed some bugs causing "Access Violation" errors.
    Now few words about removing user code and new features:

    - USB cable and phone in CDMA mode, phone has user lock
    To unlock this phone, You must reset user password and disable it, by clicking "Unlock" and then "Do Job" After this restart phone, and now You can enter QUALCOM mode.
    - USB combo cable
    All operations can be done in CDMA mode (not need special code for QUALCOM mode)

    So now our software supports both modes to unlock Qualcom based samsung phones.
    In case You use COMBO cable, prior to processing any Job, You need to selct UART port. USB Modem port is selected automagicaly by software.

    Please download SamsungRocker_v1.23.exe from support.

    Enjoy using Rocker Dongle !
    Вложения Вложения

  8. #8
    Начинающий
    Регистрация
    23.12.2007
    Адрес
    Киев
    Возраст
    39
    Сообщений
    238
    Поблагодарил(а)
    0
    Благодарностей: 0 (сообщений: 0)

    По умолчанию

    31.12.2008 Samsung Rocker v1.24 released

    Whats new:

    * Added new QUALCOM models: F490G,L811,U900U,U800G,U800F,M7500,L760G,G400F,A77 7,A747N,A561,A551
    * Added SWIFT : F250L, E250D(blue mainboard)
    * Added AGERE: E215L
    * Changed Splashscreen
    * Fixed startup speed for old CPU-s with single core (PIII 1Ghz ~2sec)

    Please download and install "SamsungRocker_v1.24.exe" from Rocker Dongle support.

    Enjoy using Rocker Dongle !

  9. #9
    Super Moderator Аватар для Sammuel
    Регистрация
    29.06.2008
    Адрес
    Yerevan
    Сообщений
    702
    Поблагодарил(а)
    0
    Благодарностей: 19 (сообщений: 12)

    По умолчанию

    Samsung Rocker v1.24.32 G810 Direct Unlock !
    29.01.2009 Samsung Rocker v1.24.32 released

    Whats new:

    * Disabled ComSelect on 3g Qualcomm tab now all is automatic (for combo cables)
    * Added Symbian models support for users who paid Samsung Rocker activation ! Read codes, Direct unlock !

    o G810 - Direct unlock Tested !
    o I450
    o I550
    o I560
    o I600
    o I607
    o I617

    * Added Swift C450 (ReadInfo,Unlock,ImeiRebuild)
    * Changed Swift Communication (Major) - Tested with D600,E250V,C450


    Symbian models will work only for users who purchased Samsung Activation. Users who didnt activated it, but have trial credits can use it while trial credits last. (Or buy activation)

    We're preparing support for i900 Omnia too !

    UART Pinout for G810 is uploaded to support area, "Pinouts" folder.

    Here are sample logs with G810 :


    Код:
    Samsung Rocker v1.24.15
    
    Loaded 501 models
    
    Available COM ports: COM3, COM4
    
    Doing Job, Please Wait
    Using    \\.\COM4 port
    
    Chipset:     M6260A-KYRZ-2.5.101012
    Modell:     SGH-G810
    SW Version:     G810CXHF2_HG1
    Flash Chip:     K5D1258DCA(G810)
    MSLAddress:     R1WQ715002
    IMEI:    357290-01-089254-1
    Starting:    Read Codes
    Network Lock:     #7465625*638*01234567#  Counter: 05-01
    Subset Lock:     #7465625*782*01234567#  Counter: 05-00
    SP Lock:     #7465625*77*01234567#   Counter: 05-00
    CP Lock:     #7465625*27*01234567#   Counter: 05-00
    Sim Lock:     #7465625*746*01234567#  Counter: 05-00
    Finished
    
     
    Doing Job, Please Wait
    Using    \\.\COM4 port
    
    Chipset:     M6260A-KYRZ-2.5.101012
    Modell:     SGH-G810
    SW Version:     G810CXHF2_HG1
    Flash Chip:     K5D1258DCA(G810)
    MSLAddress:     R1WQ715002
    IMEI:    357290-01-089254-1
    Starting:    Direct Unlock
    Phease 1:    OK
    Phease 2:    OK
    Full Unlock:    DONE
    Please switch off phone! (Do not remove battery!)
    Finished

    Please download and install "SamsungRocker_v1.24.43.exe" from support.

    Enjoy using Rocker Dongle !

  10. #10
    Gold Member Аватар для Gatin®
    Регистрация
    02.04.2008
    Адрес
    Ukraine, Donetsk
    Возраст
    40
    Сообщений
    722
    Поблагодарил(а)
    0
    Благодарностей: 1 (сообщений: 1)

    По умолчанию

    22.05.2009 Samsung Rocker v1.26 released

    Whats new

    Added support for Broadcom chipset models
    Added DIRECT UNLOCK for new Agere2 models with SHA1 (world first !)
    Small bugs fixes
    The list of new models added :
    Код:
    C3010
    C3050
    C3053
    S3500
    B460
    A401
    A607
    C3370U
    J160
    J400
    J408
    J750
    J758
    L811
    F480T
    F480V
    L766
    L768V
    M7600
    M7603
    S3870
    S5230
    S5500
    S5600
    S7220
    S7350
    S7520
    S8000
    S8300
    S8300T
    S9500
    C5510
    C5520
    C6620
    G400L
    M8800B
    M8800L
    V820
    V820F
    V820L
    Z810
    Z810V
    B520B
    M310L
    You can download this release from Rocker Dongle support. If Your support is expired, then You can not download it.

    Enjoy using Rocker Dongle !

  11. #11
    Gold Member Аватар для Gatin®
    Регистрация
    02.04.2008
    Адрес
    Ukraine, Donetsk
    Возраст
    40
    Сообщений
    722
    Поблагодарил(а)
    0
    Благодарностей: 1 (сообщений: 1)

    По умолчанию

    31.05.2009 Samsung Rocker v1.27 released

    Whats new:

    Bug fixes :
    Startup fix - starting fast on old singlecore machines
    Soft can be started without comport present in system (no unlimited cycle with just logo and can make "rescan com port" after start)
    Fixed access vilation error when model selection is scrolled down on more models with cursor down key
    __________________________________________________ _____
    New features :
    Added i780 direct unlock and read info support
    Automatic saving settings on exit (model, comport, etc)
    Added Rocker Dongle logo to main window
    Agere flash window is opened in space of service settings no more popup window in bottom of the main window
    Rewritten core and module sourcecode, soft should me much more stable now (needs testing )
    __________________________________________________ _____

    We have uploaded new version of QualCom eng. drivers to /Drivers/Samsung section at support. Please use it when unlocking phones from QC mode !


    Please download and install "SamsungRocker_v1.27.exe" from support.

    Enjoy using Rocker Dongle !

  12. #12
    Banned
    Регистрация
    17.08.2007
    Адрес
    Ставрополь 26RU
    Возраст
    48
    Сообщений
    341
    Поблагодарил(а)
    0
    Благодарностей: 17 (сообщений: 12)

    По умолчанию

    Samsung Rocker v1.30 beta all new Qualcom Code reader !

    Hello dear users !

    First, as You can see, our samsung coder is back to work, after absence due to some private reasons.
    So welcome back dear Laci !

    Second, this is latest public beta version. There is lots of changes, and i will not list them all, just few main points:

    * Security is moved to new slot (same as latest ODM Rocker or Motorocker), so to use it, You need Your support account to be working.
    * There is completelly new function added, "Code Calc" for new Qualcom based 3G Samsung models.



    So, how to work with this new version ?

    * You need new usb drivers. You can download it from support - /Drivers/Samsung/ folder.
    * You need combo cable for models which dont have microusb connector
    * You need original sim card, or You must enter code via keyboard before connecting phone to cable


    Now, the procedure it self :

    * Power on the phone with original sim card or enter "*#7465625#" code if You dont have sim card
    * Connect phone to cable and PC
    * Make sure to install latest drivers from support
    * Start new Samsung Rocker select model, service and press "Code Calc" button
    * Software will detect phone ports and automatically select appropriate ones
    * Shortly after, You will see progress and unfreeze and unlock codes


    In case that for some reason software can not detect ports properly, do this:

    * Delete all modems from Control Panel - Modems section
    * Delete all samsung drivers and reinstall new drivers set
    * You can also set ports manually if You are skilled windows user



    Thats it. If You encounter some problem, or You have tested new version , please post logs here in this topic.

    Please download and install "SamsungRocker_v1.30_beta.exe" from support. You also need new drivers, and You can find it in folowing dir: "Drivers/Samsung/"

    More details You can read at official forum:
    http://www.unlockforum.com/showthrea...m-Code-reader-!

    Enjoy using Rocker Dongle !

Информация о теме

Пользователи, просматривающие эту тему

Эту тему просматривают: 1 (пользователей: 0 , гостей: 1)

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
Rambler's Top100 Яндекс цитирования 12354